Just bought a new 2013 Like 50

[ParaIndiana]

What were you doing when it happened? Was it raining? Were you riding it when it happened? Had you done anything to it and then started it and discovered things weren't working? The electric start doesn't work, right? The solenoid gets it 12v supply from the brake light. A visual inspection of a fuse is not always enough. I've seen fuses go junk that still had the wire intact. Another thing to check would be the harness from the key. Maybe unplug it and check the pins and wires for damage.

[Berzerker1965]

You were right it was a blown fuse. I used one of the two back up fuses and every thing was fine. I picked up three more from this dealership. I was riding in the rain. Good thing I picked up spares . I had to replace the same fuse twice now. I read elsewhere on the forum where someone having the same issue, he stated using 7.5 amp fuses and the problem stopped. I will try that if the problem continues. Thanks.

[Berzerker1965]

Ok the cylynder ports have been camfered. After researching, I decided to do everything 1 step at a time starting with the BBK. Using original carb & exhaust. I am ordering keihn round jets (small) head diameter 5mm lenth 7mm thread 3.9 from JetsRus size 90 to 108. Before I order I just want to confirm with you guys that these are the right ones.

Once again thanks for all you help.

[zombie]

I think they are actually 5mm thread but wait for verification.

[Berzerker1965]

Sure thanks. Can anyone else confirm the dimensions of the Keihin jet dimensions? I got them at JetsRus. The directions in the cyclepedia don't show how to change the jets with out completely dismantling the entire carb. That includes taking the carb off the engine entirely. Is there an easier way?

[Berzerker1965]

Sorry, you were right. The thread was 4.9mm not 3.9 I must have typoed.

[zombie]

Cool. Glad you found it.

[Berzerker1965]

Do I need to buy gaskete$
 for every time I change the jets?

[BettinANDlosing]

You only need try but the carb gaskets if they tear, or expand and don't fit. I've gone years on the same float bowl gasket.