« previous next »
Pages: [1]

Author Topic: what's the stock compression ratio  (Read 3634 times)

phatboy

  • Jr. Member
  • **
  • Posts: 65
    • View Profile
what's the stock compression ratio
« on: May 14, 2013, 11:37:15 PM »
Hey, can't seem to find this information, all pages say N/A

I want to install a BBK and would prefer keeping it close to stock compression to avoid burning pistons or having to use special high octane gas (best pump gas here is 91).

I see a few different kits available, one appears to have a flat top piston and stock head, says "raises" it to 9:1 compression. Like this one: http://enviromoto.ecrater.com/p/3369520/ncy-72cc-big-bore-kit-fo

So that means it's lower than 9:1?
Logged
Agility 50 w/72cc BBK, A9 cam, stock airbox and exhaust (both drilled out), remove air tube restriction, stock head, stock carb, 105 main jet, CDI cut, smooth variator boss, stock variator w/5g rollers

Vivo

  • Hero Member
  • *****
  • Posts: 4980
    • View Profile
Re: what's the stock compression ratio
« Reply #1 on: May 15, 2013, 01:51:46 AM »
The Kymco website states the compression ratio of Agility 50 is 11:1
Logged

baddi

  • Sr. Member
  • ****
  • Posts: 498
  • Top speed: 38 km/h and fuel economy: 50 km/l
    • View Profile
    • My project fuel injection gallery
Re: what's the stock compression ratio
« Reply #2 on: May 30, 2013, 11:19:24 AM »
It is a good idea to have a proper service manual. I recommend this: http://scootergrisen.dk/scooterhjemmeside/download/kymco_agility_servicemanual.pdf as it has alot of technical specifications. :D
Logged
First Kymco agility 50 (2008) 11.000+ km (dead)
Second kymco agility 50 (2010) 20.000+ km. Project Fuel Injection. Stolen.
Kymco K-pipe 125 (2014) 7400 km.

blue

  • Hero Member
  • *****
  • Posts: 3935
    • View Profile
Re: what's the stock compression ratio
« Reply #3 on: June 02, 2013, 01:32:51 PM »
my manual says its 11. The last time I hooked a cage up to it it read 125 on the gauge which I know is realy good I have seen some as high as 130 thats the best you can do. If you go under 110
you are looking at rebuilding you motor.
Logged
Pages: [1]
« previous next »