Author Topic: New DT300i owner.  (Read 15673 times)

SpikeOne

  • Newbie
  • *
  • Posts: 43
    • View Profile
Re: New DT300i owner.
« Reply #30 on: July 28, 2011, 02:29:17 PM »
I don't know about "new", they're, what, 4 years old as a model worldwide.
I would have thought that that would have been long enough these days for it to bed in, and in any case the machanical bits and pireces are all standard. There was a fault on mine on day one, and by the end of day three they had sources the parts, fitted them and delivered it back to my home.
But I take your point regarding the tupperware.
I did quite a bit or research when I got mine and only bought it becuase support was pretty good locally.
My first choice, (after the obvious Honda, Yamaha and Suzuki offereings), was Piaggio XEVO400, but alas crap support in the county, (Frazers - Gloucester, steer well clear...).
From what I've heard about Italian electrics I'm still glad I went the way that I did, even if I did lose 3 horsepower.
Spike
Gloucestershire - Ingerlund...

Current ride - Kymco Downtown 300i
Previously owned:-
Yamaha Vity
MZ ETZ251
Honda CD175
Honda CB250 G5
BSA Bantam D14/4
BSA Sunbeam
Honda C50

TANWare

  • Hero Member
  • *****
  • Posts: 552
  • E3.38, RP oil Eng & FD, Dr Pulley 20x12 14 gr
    • View Profile
Re: New DT300i owner.
« Reply #31 on: July 28, 2011, 02:39:30 PM »
When I say new I really meant still in production and scheduled for the next model year. This means parts are still stocked and in production. Once there is a major change then we could become the older non current production model.

I ahd heard Kymco's were of a good reliabilty and didn't hear any major prts horror stories and this is what made it a contender for me. The high MPG and performance within a range I wanted was the deciding factors. I still have no regrets either but it is human nature to want just that little bit more..................

StKilda

  • Newbie
  • *
  • Posts: 17
    • View Profile
Re: New DT300i owner.
« Reply #32 on: July 31, 2011, 08:53:38 AM »
I have been waiting since april for my burnt orange 300i to arrive and its still a no show maybe because im in australia, when I last checked in early july they said, hadn't been shipped yet but should be 3 weeks I am sick of waiting.

racewalker

  • Sr. Member
  • ****
  • Posts: 341
    • View Profile
Re: New DT300i owner.
« Reply #33 on: July 31, 2011, 01:53:24 PM »
I can feel for you, I waited for 2 months for mine and was totally put off by my local dealer. I don't care if it was he or Kymco Canada but I will not purchase from him again.
08 People S 125
11 Downtown 300i

TANWare

  • Hero Member
  • *****
  • Posts: 552
  • E3.38, RP oil Eng & FD, Dr Pulley 20x12 14 gr
    • View Profile
Re: New DT300i owner.
« Reply #34 on: August 01, 2011, 02:20:22 AM »
I got lucky as it was on the showroom floor. Actually it was a good thing because if it were not I would have probably ended up buying something else...............

SpikeOne

  • Newbie
  • *
  • Posts: 43
    • View Profile
Re: New DT300i owner.
« Reply #35 on: August 01, 2011, 08:59:36 AM »
4 months is unreasonable.
I would be very tempted to cancel the order.
Spike
Gloucestershire - Ingerlund...

Current ride - Kymco Downtown 300i
Previously owned:-
Yamaha Vity
MZ ETZ251
Honda CD175
Honda CB250 G5
BSA Bantam D14/4
BSA Sunbeam
Honda C50

StKilda

  • Newbie
  • *
  • Posts: 17
    • View Profile
Re: New DT300i owner.
« Reply #36 on: August 03, 2011, 09:58:46 AM »
You are right spike one, I will probably give them another 2 weeks, I did look at the aprilla Sports cube 300 its also a nice scooter. that what I will go with unless things start moving along pretty soon.

SpikeOne

  • Newbie
  • *
  • Posts: 43
    • View Profile
Re: New DT300i owner.
« Reply #37 on: August 03, 2011, 10:11:41 AM »
When I bought mine, I was given a specific date that it would be in the country, (about 6 weeks hence).
"Give me a couple of days for build", he said, "and you'll have it October the 9th".
He was a couple of days late, but that was all, which didn't displease me.

However, it did break down within 10 miles on the way home!

The back brake seized solid. It turned out to be a missing port in the master cyclinder, which he fixed the following day.
After that - no problems so far...
« Last Edit: August 03, 2011, 10:13:18 AM by SpikeOne »
Spike
Gloucestershire - Ingerlund...

Current ride - Kymco Downtown 300i
Previously owned:-
Yamaha Vity
MZ ETZ251
Honda CD175
Honda CB250 G5
BSA Bantam D14/4
BSA Sunbeam
Honda C50

frankiej1949

  • Newbie
  • *
  • Posts: 49
    • View Profile
Re: New DT300i owner.
« Reply #38 on: August 03, 2011, 11:03:21 AM »
I bet that was a bit scary Spike. Was thsi the dealers fault or the manufacture. Good job it happened whilst running in. I have had mine 10 days now and love it. In the manual it says it has ABS is this true? I cant say I have noticed. I meant to have a look to see if there was a warning light on the speedo dial.

SpikeOne

  • Newbie
  • *
  • Posts: 43
    • View Profile
Re: New DT300i owner.
« Reply #39 on: August 03, 2011, 11:10:34 AM »
It was a manufacturing fault. they even replaced the cyclinder again completely at the first service just to make sure.
I asked them to check out the pads on the back wheel too, just in case the overheating had done some damage, but apparently it was OK.

As to ABS Frankie, no, you ain't got it.
I thought for one moment that they had slipped up and sent me an ABS model when I spotted the serrated disk on the front, but when I checked this out, it turned out to be the speedo sensor. To be honest, I don't think the brakes are grippy enough to lock the wheels at any sort of speed anyway! It's never locked on me anyway.

I was lead to believe that we do have tyre pressure management though, but I'm beginning to doubt that too.
Spike
Gloucestershire - Ingerlund...

Current ride - Kymco Downtown 300i
Previously owned:-
Yamaha Vity
MZ ETZ251
Honda CD175
Honda CB250 G5
BSA Bantam D14/4
BSA Sunbeam
Honda C50

TANWare

  • Hero Member
  • *****
  • Posts: 552
  • E3.38, RP oil Eng & FD, Dr Pulley 20x12 14 gr
    • View Profile
Re: New DT300i owner.
« Reply #40 on: August 03, 2011, 12:21:22 PM »
No TPM unfortunately. The ABS is not so much for the dry but when it is wet out or oil slicks etc. Wouldn't want to be doing 55 MPH or close to hydroplaning speed and have the front lock up either.

SpikeOne

  • Newbie
  • *
  • Posts: 43
    • View Profile
Re: New DT300i owner.
« Reply #41 on: August 03, 2011, 01:59:38 PM »
It doesn't bother me.
I've been riding bikes of one sort or another for 40 years and never had ABS so don't miss it.
I'm told that it's not much cop, except in a straight line anyway, and that's usually when you don't need it.
As to the TPM - a swift kick in the rear end is as good a way as any to tell whether the air's about right, if you haven't npoticed a bit of instability already.

 :)
Spike
Gloucestershire - Ingerlund...

Current ride - Kymco Downtown 300i
Previously owned:-
Yamaha Vity
MZ ETZ251
Honda CD175
Honda CB250 G5
BSA Bantam D14/4
BSA Sunbeam
Honda C50

frankiej1949

  • Newbie
  • *
  • Posts: 49
    • View Profile
Re: New DT300i owner.
« Reply #42 on: August 03, 2011, 03:36:08 PM »
Perhaps ABS stands for alotta bull s**t  ;D

SpikeOne

  • Newbie
  • *
  • Posts: 43
    • View Profile
Re: New DT300i owner.
« Reply #43 on: August 03, 2011, 03:38:20 PM »
 ;D
Spike
Gloucestershire - Ingerlund...

Current ride - Kymco Downtown 300i
Previously owned:-
Yamaha Vity
MZ ETZ251
Honda CD175
Honda CB250 G5
BSA Bantam D14/4
BSA Sunbeam
Honda C50

frankiej1949

  • Newbie
  • *
  • Posts: 49
    • View Profile
Re: New DT300i owner.
« Reply #44 on: August 03, 2011, 09:03:22 PM »
Wish there was a few more of us in the UK. It would be good to have a meet of DT owners.

An Error Has Occurred!

Call to undefined function split()