New Guy old Topic

[Loomin]

Hi my name is Lumin and I live in Amsterdam with my wife and daughter.
This forum is great and some of you  agility 50 guys/girls really know your stuff.





As for me I just got my wife a purple 2008 Agility 50 @ 3500km for 600euros.
The scooter had been sitting for a loooong time and really didn't want to start, but all it needed was some new fuel/oil and a bath.

I have read allot about derestricting these guys and just wanted to confirm a couple things.

1. When I cut the Cdi box, do I need to up the jet or removing the rev limiter really should't
run me any leaner?
2. I will bring the boss to a local fabricator (2 block away to throw it on the lathe for a second, but once installed what jet size should I install (82)?
3. For the time being this is all I want to do as my wife has only ridden for a couple months. ( I am a gear-head and engineer but will resist other modifications.........for now!)

4. Wanted to confirm NGK part # as I like using iridium and have a local vendor for them.
My wife drives 7.4km each way and isn't a real racer, so a hotter plug may be a little better (CR6HSA) or should i stick with a CR7HSA?

I will share photos as I go, and thanks for the help.

[Rianna]

http://kymcoforum.com/index.php?topic=2852.msg28592#msg28592

Hi, Lumin!

Welcome to the forum!!

[Loomin]

Thanks Rianna,

I ordered a couple CR7HIX, As it is the same as what I use for my Honda VTR Motorcycle....Convenient

[blue]

welcome to the fourm loomin. nice choice in scoots. I also have the blue agilty 50 from your pic it looks like a few things are dif. like you tail lights love that wind scren. its best if you up grade buy doing all 3 the boss jet and cdi . and leave it at that and you should be all good. me my self beleave that if I wan up grade anymore I should of just got a bigger scoot.

[Agent Bob]

Welcome Loomin.

[Loomin]

I had the boss lathed down in trade for a 3euro beer:



The Boss now weighs 45grams.

Just waiting on jet (I bought an 82 main since i didn't get a goodie bag )

[Loomin]

I pulled the carb when i received the new jet, but someone beet me to the punch. Their was an 82 already installed.
Good practice right

[blue]

Good job give your self a beer.

[codger78]

Loomin.....Looks like a sturdy windscreen..Would like to see a front view if you can manage it....I was able to get a good one on the second try......Hefty hardware and a three or four point footing is really needed to avoid rattles and loosening.
I don't recall seeing your's on the internet.....The hand guards must help a lot in the cold weather.

[Loomin]

codger78,

The windscreen is sturdy with no rattle.
http://www.biondiaccessori.eu/

[blue]

oooooooooooooly s--- thats a tall a== screen. But cool.

[Loomin]

The Dutch are the tallest people on the planet a couple years running and they definitely make really tall windscreens here.

[codger78]

Loomin....Looks like a good four point foot.......Mine (the best that I could get) was just bolted at two points (into the rear view mirrors), but I was able to force it against the front cowling with a section of water pipe insulation (spunge tubing) as a cushionto take up any vibration, and provide a third point (foot).
It has held up nicely now for thousands of miles without a murmur.
Thanks for the pics.

[Loomin]

 I like your 3rd foot idea...do you have pics?

[blue]

wow just noticed the front lower lights On your scoot mine dont have team I have been noticing a lot other 50 that are a little diff mmmmmm most be the year they wear made.