Author Topic: Start button problem  (Read 14419 times)

Yoni159

  • Full Member
  • ***
  • Posts: 170
    • View Profile
Start button problem
« on: April 15, 2025, 12:07:38 PM »
I have kymco dt 350i 2015 with 81000km and Sometimes you have to press the start button 7 times until it turns on. I heard that there could be corrosion on the button contacts. Could that be the problem? Or maybe my assy stator motor are going do die?

Iahawk

  • Hero Member
  • *****
  • Posts: 3104
  • Eastern Iowa, USA
    • View Profile
Re: Start button problem
« Reply #1 on: April 15, 2025, 12:29:38 PM »
the contacts in your starter button can certainly be corroded, dirty or worn. My 41 year old motorcycle needs the starter button pushed in firmly and straight for it to work. I haven't gotten around to pulling it and cleaning it. I'd start with cleaning your starter button...if that doesn't solve the problem then it is on to other possibilities.
2010 People S200 - sold after 8 wonderful years!
2014 Ninja 300
1996 Honda Helix
1984 Honda Nighthawk 650

mousejunks

  • Hero Member
  • *****
  • Posts: 591
    • View Profile
'09 Kymco Espresso 150i
'11 Kymco Downtown 300i ABS - 79,500km
'17 Kymco Downtown 350i ABS

Beaker99

  • Newbie
  • *
  • Posts: 47
  • Auckland, New Zealand
    • View Profile
Re: Start button problem
« Reply #3 on: April 22, 2025, 01:11:28 AM »
I've recently had to replace one of the switches on the break leavers as they can also fail, which would give the same symptoms as a start button issue. I'm assuming you've tried starting with both break leavers pulled in to rule that out?