Having trouble accelerating from a full stop.

[devrongrimm]

Has anyone experienced this kind of problem with your unit?
When coming from a full stop and then you start to run your scooter it is having a hard time in accelerating.
From 0 - 20 or sometimes 30 kph it so slow, like something pulling it back. But once you're moving about 40 kph there's no problem from reaching 150+ kph.
It is just from the full stop acceleration.
I hope someone could share there experience with me if ever they've encountered the same problem.

[Stig / Major Tom]

Miles on your scooter?
Miles since last CVT servicing?
Stig

[Ruffus]

@devrongrimm welcome here!
First measures in this case should be:
-scoot on mainstand
-brakes pulled and released (stationary brake too)
-try to move rearwheel by hand
-rotates freely, YES/NO

-if NO your rear brakecylinder/disc or hand brake
needs to be revised

-if YES, take off all CVT covers (3) and check whether all moves there properly
-rear alu cover with inserted support bearing stucks sometimes and is hard to remove.

[devrongrimm]

Miles on your scooter?
Miles since last CVT servicing?
Stig

Haven't done any CVT servicing yet. But the miles is almost at 10k so it is scheduled for PMS.  I would have it checked there since you mention it. I'll update here if the problem has gets fixed.

[devrongrimm]

@devrongrimm welcome here!
First measures in this case should be:
-scoot on mainstand
-brakes pulled and released (stationary brake too)
-try to move rearwheel by hand
-rotates freely, YES/NO

-if NO your rear brakecylinder/disc or hand brake
needs to be revised

-if YES, take off all CVT covers (3) and check whether all moves there properly
-rear alu cover with inserted support bearing stucks sometimes and is hard to remove.

Okay, I'll do this and check the things you mentioned. I'll update once I've checked it.