Author Topic: Won't stay on  (Read 1667 times)

varnie691

  • Newbie
  • *
  • Posts: 8
    • View Profile
Won't stay on
« on: December 27, 2020, 05:35:23 PM »
I was experiencing on the freeway when I got to 55mph it was losing power as if I was letting go of the throttle and now it won't stay on. Can anyone help me with this. Fuel filter and spark plug are new

Sent from my SM-G955U using Tapatalk


Iahawk

  • Hero Member
  • *****
  • Posts: 2434
  • Eastern Iowa, USA
    • View Profile
Re: Won't stay on
« Reply #1 on: December 27, 2020, 07:56:49 PM »
I'm not familiar with this motor..is is fuel injected or does it have a carburetor? If carb...are you getting fuel? Could something have plugged? A shot of starting fluid into the carb can help rule out fuel issues (if it still doesn't start it's not a fueling issue). If it does start you have probably found your trouble source.

Are you getting spark? (pull the plug, ground it and crank over)

Is your battery good? (tested with a multimeter?)

how many miles on the scoot? Any other work done to it, lately?
2010 People S200 - sold after 8 wonderful years!
2014 Ninja 300
1996 Honda Helix
1984 Honda Nighthawk 650 - work in progress

Kansas kymco

  • Hero Member
  • *****
  • Posts: 2044
  • Mcpherson KS or Ely MN
    • View Profile
Re: Won't stay on
« Reply #2 on: December 27, 2020, 11:54:18 PM »
Iahawk the GV is carbureted with a vacuum driven fuel pump. I would make sure your vacuum hose to the fuel pump is good. The diaphragm in the fuel pump could be bad as well I beleive a replacement fuel pump is about $45. Just some things to check.
In parts 200S and Grand Vista and my motorcycles 2 CS BMW'S and one GS BMW.

Sold-32 Kymco scooters of various sizes this summer.

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7712
  • West Tennessee, USA
    • View Profile
Re: Won't stay on
« Reply #3 on: December 28, 2020, 11:45:46 AM »
Iahawk the GV is carbureted with a vacuum driven fuel pump. I would make sure your vacuum hose to the fuel pump is good. The diaphragm in the fuel pump could be bad as well I beleive a replacement fuel pump is about $45. Just some things to check.
That pump like the ones they put on lawn mower engines?
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

Pablo.gyds03

  • Newbie
  • *
  • Posts: 21
  • San Diego, CA
    • View Profile
    • YouTube Channel
Re: Won't stay on
« Reply #4 on: December 28, 2020, 04:26:34 PM »
I'm guessing fuel, disconnect the fuel inlet line going to the carb, crank the engine and you should have gas pumping out of the line. If you don't it could be the fuel pump.
And yes its a Vacuum Fuel pump, it runs off of crankcase vacuum also check your Vacuum line to see if it's connected.
-
Paul

05 Kymco Grand Vista 250
93 Kawasaki KLR 650
16 KTM 1290 Super Duke R
12 SkyTeam 125 (Honda CT70/Dax Clone)

varnie691

  • Newbie
  • *
  • Posts: 8
    • View Profile
Re: Won't stay on
« Reply #5 on: January 01, 2021, 06:18:56 PM »
So I found out that my fuel filter was dirty and that was causing it to not get fuel swapped it out and it runs fine [emoji119][emoji119][emoji119][emoji119]

Sent from my SM-G955U using Tapatalk


Kansas kymco

  • Hero Member
  • *****
  • Posts: 2044
  • Mcpherson KS or Ely MN
    • View Profile
Re: Won't stay on
« Reply #6 on: January 01, 2021, 07:01:45 PM »
So I found out that my fuel filter was dirty and that was causing it to not get fuel swapped it out and it runs fine [emoji119][emoji119][emoji119][emoji119]

Sent from my SM-G955U using Tapatalk
Do you mean your new fuel filter was dirty again after you replaced it?  Glad you found the issue and gave us a update.
In parts 200S and Grand Vista and my motorcycles 2 CS BMW'S and one GS BMW.

Sold-32 Kymco scooters of various sizes this summer.

varnie691

  • Newbie
  • *
  • Posts: 8
    • View Profile
Re: Won't stay on
« Reply #7 on: January 01, 2021, 07:27:27 PM »
Yes so when I got the bike it was sitting since 2013 and had not been turned on since. So when I got it running I flushed the fuel tank three times using clean fuel and draining it into a bucket. I've been using seafoam to clean out the tank and carburetor, so I guess it was still breaking all the dirt from the tank. I went to O'Reilly's to buy two more filters so as it is cleaning the tank I can change out the filter.This is the filter I bought and works great it was $4.99

Sent from my SM-G955U using Tapatalk


Kansas kymco

  • Hero Member
  • *****
  • Posts: 2044
  • Mcpherson KS or Ely MN
    • View Profile
Re: Won't stay on
« Reply #8 on: January 01, 2021, 08:18:24 PM »
The Seafoam will also keep the carburetor clean and stabilize the fuel. Thanks for the clarification.
In parts 200S and Grand Vista and my motorcycles 2 CS BMW'S and one GS BMW.

Sold-32 Kymco scooters of various sizes this summer.

varnie691

  • Newbie
  • *
  • Posts: 8
    • View Profile
Re: Won't stay on
« Reply #9 on: January 01, 2021, 08:39:15 PM »
So now the problem that I'm having is that I can't keep a stable idle and its very frustrating I can't figure it out

Sent from my SM-G955U using Tapatalk


Kansas kymco

  • Hero Member
  • *****
  • Posts: 2044
  • Mcpherson KS or Ely MN
    • View Profile
Re: Won't stay on
« Reply #10 on: January 01, 2021, 10:35:21 PM »
A couple of things  I can think of is check your vacuum lines and the chance your carburetor has something in the small passages. I gave up on a carburetor on a People 150 that sat unused for years and just put a new carburetor on it.
In parts 200S and Grand Vista and my motorcycles 2 CS BMW'S and one GS BMW.

Sold-32 Kymco scooters of various sizes this summer.

varnie691

  • Newbie
  • *
  • Posts: 8
    • View Profile
Re: Won't stay on
« Reply #11 on: January 01, 2021, 11:04:16 PM »
That's what I'm thinking of doing [emoji2369]

Sent from my SM-G955U using Tapatalk


Pablo.gyds03

  • Newbie
  • *
  • Posts: 21
  • San Diego, CA
    • View Profile
    • YouTube Channel
Re: Won't stay on
« Reply #12 on: February 22, 2021, 02:08:21 AM »
pull your carb, and clean every passage way on it, blow Carb cleaner through every circuit.
sounds like your pilot jet may be partially blocked. also there are somes small holes under the throttle butterfly, these are transition holes, if you spray carb cleaner through the pilot circuit you should see it come out of those holes.
-
Paul

05 Kymco Grand Vista 250
93 Kawasaki KLR 650
16 KTM 1290 Super Duke R
12 SkyTeam 125 (Honda CT70/Dax Clone)

An Error Has Occurred!

Call to undefined function split()