Author Topic: Handlebar problem  (Read 713 times)

diverhap

  • Newbie
  • *
  • Posts: 14
    • View Profile
Handlebar problem
« on: August 19, 2019, 12:17:09 PM »
Kymco 300i 2014
30000 Km

When turning the handlebar right or left Or vice versa (scooter on the main stand) I feel that the handlebar slight catching in the middle

and while driving I don't feel this catching

is the steering bearing is the problem (top or bottom bearing)

Thanks   


CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7758
  • West Tennessee, USA
    • View Profile
Re: Handlebar problem
« Reply #1 on: August 19, 2019, 01:46:30 PM »
Bearings or cables/wiring harness....
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

diverhap

  • Newbie
  • *
  • Posts: 14
    • View Profile
Re: Handlebar problem
« Reply #2 on: August 19, 2019, 02:26:33 PM »
why you say cables/wiring harness

it is a mechanical issue in the handlebar moving left or right

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7758
  • West Tennessee, USA
    • View Profile
Re: Handlebar problem
« Reply #3 on: August 19, 2019, 03:25:56 PM »
Cables/harness could be hanging on something. Probably not the cause if you bought the bike new and did not change anything in that area. That would definitely then, be the head bearing(s).
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

kneeslider

  • Hero Member
  • *****
  • Posts: 547
    • View Profile
Re: Handlebar problem
« Reply #4 on: August 26, 2019, 06:24:28 AM »
Definitely the head bearings.

Have the top and bottom ones replaced and you're good to go.

Somehow, it is a common issue with the DT, some have said they come under lubricated from factory.
2019 Yamaha X-Max 250

diverhap

  • Newbie
  • *
  • Posts: 14
    • View Profile
Re: Handlebar problem
« Reply #5 on: August 26, 2019, 08:00:44 AM »

mousejunks

  • Hero Member
  • *****
  • Posts: 583
    • View Profile
Re: Handlebar problem
« Reply #6 on: August 26, 2019, 10:33:00 AM »
The steering bearing is a known issue with the DT. Another possibility is that the entire front section is sagging (as it is only held up by 6 screws) and is rubbing on the forks.
'09 Kymco Espresso 150i
'11 Kymco Downtown 300i ABS - 79,500km
'17 Kymco Downtown 350i ABS

An Error Has Occurred!

Call to undefined function split()