Need help thank you

[Jim Grant]

 I'm about to give up nobody responds where can I find a CDI box for that's

[eamartin]

I have read your other posts and you refer to both a ZR50 and a ZX50.  I'm not familiar with either of these models.  In fact, I cannot  find the ZR50 in any parts suppliers listings.  Do you have a ZX50? 

[Jim Grant]

Thanks for replying and sorry for the mix up, let me start over 2003 zx50 super fever cdi box thank you

[souzamoto]

30400-KXCX-J10
UNIT COMP CDI & SPEED CONTROL

This should be the part number you need. I would contact any kymco dealer for help. Number should be good worldwide

CJS

[eamartin]

http://www.kymcopartsmonster.com/pages/OemParts?aribrand=KYM#/Kymco_USA/SC10AS_ZX50/Battery/2K01120005/01120047

I cannot send a photo since I don't have a zx50.  But if you go to the above site, the exploded view shows a # 225.  This is the CDI.  They are sometimes 1/2" x 1" x 2-1/2 " with terminals sticking out one side.  Good luck.  That's the best I can do.   

[blue]

I beleave the zx50 takes the same cdi as the agilty 50. But double check befor buying.

[eamartin]

Is there a 2-stroke Agility 50?

[Jim Grant]

Thanks guys
I got the cdi box off eBay but it looks like I have to buy a entire harness in order to get the plug in...suggestions??

[eamartin]

Thanks guys
I got the cdi box off eBay but it looks like I have to buy a entire harness in order to get the plug in...

Can you share the link to the cdi you bought? Why do you need to buy a harness? 

[Jim Grant]

Can you share the link to the cdi you bought? Why do you need to buy a harness?

Can someone or does anyone know which wire goes to what pin?
thanks