Author Topic: Tire size on the 700 uxv (Read 4085 times)

Wicked Al · « **Reply #15 on:** May 19, 2015, 03:07:43 PM »

Quote from: pndwv on May 19, 2015, 02:45:53 PM

Nice Work

Thanks! I have too much fun doing this stuff.

laidback · « **Reply #16 on:** May 19, 2015, 07:43:00 PM »

If we had that much hp in our 700's we would putting can-am's to shame. Lol

pndwv · « **Reply #17 on:** May 21, 2015, 02:09:32 PM »

No doubt on that how did you get that much Horsepower

Wicked Al · « **Reply #18 on:** May 21, 2015, 02:32:48 PM »

Suzuki SV1000 motor...stock. Didn't really feel a need to build it

laidback · « **Reply #19 on:** May 21, 2015, 02:45:42 PM »

Wicked al try putting a boss boss 502 in the uxv I don't think there is a need to build that motor either.

Wicked Al · « **Reply #20 on:** May 21, 2015, 02:58:14 PM »

Hmmmmmmmm.....I'm a Hemi guy, Hellcat has a nice ring to it. Might have to relocate the seat. Speaking of mods, I discovered the Fiat 500 is about the same wheelbase as a UXV 700, that would make a fun body change.

laidback · « **Reply #21 on:** May 21, 2015, 03:21:47 PM »

Wicked al I misspelled that it's boss hoss 502 check it out on YouTube

pndwv · « **Reply #22 on:** June 03, 2015, 06:33:48 PM »

Hey Alex what size wheels did you go with and what were the offsets Looks great to by the way keep up the good work
Thanks,Paul

Wicked Al · « **Reply #23 on:** June 04, 2015, 04:58:22 AM »

Laidback, looked up the Boss Hoss, agreed, wouldn't have to modify that motor at all, might need a slightly larger fuel tank though.

Paul, The tires are on MSA M-21 Lok wheels. These are 14x7 with a zero offset. http://cocomponents.com/dealer/m21-lok-utv-wheels-beadlock/

Because there is no offset, it will make the vehicle a few inches wider as the stock wheels have a positive offset. Because I also did the wider tires in the back, I stretched the bed another 6 inches wider to accommodate the tires so they would tuck into the fenders on full compression.

pndwv · « **Reply #24 on:** June 05, 2015, 06:14:53 PM »

Thanks for the info kinda don't want to make mine wider just wanting more ground clearance
Paul

Wicked Al · « **Reply #25 on:** June 06, 2015, 04:05:29 AM »

I'm sure other manufactures have tables like this too, http://cocomponents.com/dealer/wheel-specs/ you can see which wheel has the right offset. I haven't measured the stock wheels so don't know what they are. Bolt pattern is 4 on 110.

pndwv · « **Reply #26 on:** June 08, 2015, 07:44:16 PM »

Thanks for the info
Paul

JoeMarshall · « **Reply #27 on:** June 23, 2015, 11:43:32 PM »

So I had to check out the boss hoss 502. Interesting build. I was surprised when I watched the video when it raced the ninja zx12. Ninja wasted it, I thought with that motor it could keep up.

laidback · « **Reply #28 on:** June 24, 2015, 12:58:40 PM »

The boss boss weighs a lot I think it's a little over 1,600 pounds.

JoeMarshall · « **Reply #29 on:** June 24, 2015, 01:19:43 PM »

I doubt weight is the problem on that. lol. That's a lot of motor for that, he prolly can't hold it wide open. I just wanted to see it beat the ninja.

KymcoForum.com

News:

Author Topic: Tire size on the 700 uxv (Read 4085 times)

Wicked Al

Re: Tire size on the 700 uxv

laidback

Re: Tire size on the 700 uxv

pndwv

Re: Tire size on the 700 uxv

Wicked Al

Re: Tire size on the 700 uxv

laidback

Re: Tire size on the 700 uxv

Wicked Al

Re: Tire size on the 700 uxv

laidback

Re: Tire size on the 700 uxv

pndwv

Re: Tire size on the 700 uxv

Wicked Al

Re: Tire size on the 700 uxv

pndwv

Re: Tire size on the 700 uxv

Wicked Al

Re: Tire size on the 700 uxv

pndwv

Re: Tire size on the 700 uxv

JoeMarshall

Re: Tire size on the 700 uxv

laidback

Re: Tire size on the 700 uxv

JoeMarshall

Re: Tire size on the 700 uxv

An Error Has Occurred!