« previous next »
Pages: [1]

Author Topic: TPS code  (Read 2752 times)

solberglandandcattle

  • Newbie
  • *
  • Posts: 15
    • View Profile
TPS code
« on: April 14, 2015, 10:04:01 PM »
I've started to narrow my no power problem down its running a TPS code, now I ordered a new sensor and put it in, and it's still running the code, anybody have any ideas??
Logged

de dee

  • Hero Member
  • *****
  • Posts: 2055
  • 2011 300i downtown 82,265 KM.
    • View Profile
Re: TPS code
« Reply #1 on: April 14, 2015, 10:13:24 PM »
what kind of scooter do you have , to have tire sensor code read out,. is that part of ABS brakes, 
Logged

solberglandandcattle

  • Newbie
  • *
  • Posts: 15
    • View Profile
Re: TPS code
« Reply #2 on: April 15, 2015, 07:33:54 PM »
It's a 2012 500i side by side. I was meanin the throttle position sensor
Logged

BettinANDlosing

  • Hero Member
  • *****
  • Posts: 2235
  • Carter Merz
    • View Profile
    • Columbia Scooters
Re: TPS code
« Reply #3 on: April 15, 2015, 09:43:30 PM »
Could be the ECU itself not picking up the TPS signal. Double check all the wiring too.
Logged
2002 Kymco B&W 300; MRP 78MM "300CC", Naraku cam, Yoshimura rS3 exhaust, 17g Sliders, Yellow torque spring drilled airbox, stock carb #115 main #40 pj.

2001 "Yamaha" Zuma AKA MBK Booster; MHR OverRange, Dellorto 19mm BHBG, Polini "big" intake, RS-3 Rear shock, Stock cylinder.

carmen007

  • Newbie
  • *
  • Posts: 33
    • View Profile
Re: TPS code
« Reply #4 on: April 20, 2015, 06:30:51 PM »
Are you getting a 06 code
Logged
2013 Kymco People GT 300I
14g Dr pulley

2009 Schwinn Newport 150
2012 Genuine Buddy 125

solberglandandcattle

  • Newbie
  • *
  • Posts: 15
    • View Profile
Re: TPS code
« Reply #5 on: April 22, 2015, 07:56:57 PM »
It's giving me a p1121 code, put a new throttle position sensor in and no change, can't get rid of the code nothin
Logged

JoeMarshall

  • Newbie
  • *
  • Posts: 41
    • View Profile
Re: TPS code
« Reply #6 on: June 01, 2015, 01:11:58 AM »
Did you get the code to disappear. and did you do the reset procedure. Also you will need to do the relearn for the tps.
Logged
Pages: [1]
« previous next »