« previous next »
Pages: [1]

Author Topic: propeller removal  (Read 2077 times)

mroc

  • Newbie
  • *
  • Posts: 40
    • View Profile
propeller removal
« on: February 21, 2015, 01:34:33 AM »
Doing the water seals on my s9, how.do you remove propeller bolt easily?
Logged

BettinANDlosing

  • Hero Member
  • *****
  • Posts: 2235
  • Carter Merz
    • View Profile
    • Columbia Scooters
Re: propeller removal
« Reply #1 on: February 21, 2015, 01:45:49 AM »
It's an IMPELLER haha, you should use an impact to get it off.
Logged
2002 Kymco B&W 300; MRP 78MM "300CC", Naraku cam, Yoshimura rS3 exhaust, 17g Sliders, Yellow torque spring drilled airbox, stock carb #115 main #40 pj.

2001 "Yamaha" Zuma AKA MBK Booster; MHR OverRange, Dellorto 19mm BHBG, Polini "big" intake, RS-3 Rear shock, Stock cylinder.

mroc

  • Newbie
  • *
  • Posts: 40
    • View Profile
Re: propeller removal
« Reply #2 on: February 21, 2015, 01:48:08 AM »
K thanks. Sorry typo.
Logged

BettinANDlosing

  • Hero Member
  • *****
  • Posts: 2235
  • Carter Merz
    • View Profile
    • Columbia Scooters
Re: propeller removal
« Reply #3 on: February 21, 2015, 01:49:59 AM »
No problem hahaha it looks like a propeller. You can get cheap-o impacts at Harbor Freight or stores that sell Chinese tools.
Logged
2002 Kymco B&W 300; MRP 78MM "300CC", Naraku cam, Yoshimura rS3 exhaust, 17g Sliders, Yellow torque spring drilled airbox, stock carb #115 main #40 pj.

2001 "Yamaha" Zuma AKA MBK Booster; MHR OverRange, Dellorto 19mm BHBG, Polini "big" intake, RS-3 Rear shock, Stock cylinder.

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: propeller removal
« Reply #4 on: February 21, 2015, 02:21:28 AM »
Correct me if I'm wrong but is'nt that a reverse thread?

Josh (Scooter Invasion) has a thread on rebuilding that set up. It's about 5 years old but complete.
Logged
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

BettinANDlosing

  • Hero Member
  • *****
  • Posts: 2235
  • Carter Merz
    • View Profile
    • Columbia Scooters
Re: propeller removal
« Reply #5 on: February 21, 2015, 08:00:21 AM »
I don't know on the s9. Now that you say that, i think the 250 is right hand threads.
Logged
2002 Kymco B&W 300; MRP 78MM "300CC", Naraku cam, Yoshimura rS3 exhaust, 17g Sliders, Yellow torque spring drilled airbox, stock carb #115 main #40 pj.

2001 "Yamaha" Zuma AKA MBK Booster; MHR OverRange, Dellorto 19mm BHBG, Polini "big" intake, RS-3 Rear shock, Stock cylinder.

mroc

  • Newbie
  • *
  • Posts: 40
    • View Profile
Re: propeller removal
« Reply #6 on: March 04, 2015, 04:38:23 AM »
Yes it was reverse thread. Any idea how to get the bolt behind it out the one that runs thru the bearing seals
Logged

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: propeller removal
« Reply #7 on: March 05, 2015, 05:12:53 PM »
Logged
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...
Pages: [1]
« previous next »