« previous next »
Pages: [1]

Author Topic: Need some help with ignition lock  (Read 1492 times)

miller10

  • Newbie
  • *
  • Posts: 3
    • View Profile
Need some help with ignition lock
« on: December 18, 2014, 08:15:37 AM »
Yesterday someone try to steal my scooter. Police found it in 30 minutes but they allready tried to "bridge" the lock. Now I need help to wire it back again. I don't know where to connect which cable.

I have 2 green cables, 1 red, 1 black and 1 yellow-blue
« Last Edit: December 18, 2014, 08:18:19 AM by miller10 »
Logged

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: Need some help with ignition lock
« Reply #1 on: December 18, 2014, 08:53:44 AM »
http://www.kymcoforum.com/index.php?topic=4780.msg48544#msg48544

That post has an Image Shack link that will take you to a Pict of the switch.

Glad you got your bike back, and welcome to the forum.

Just for reference... Red is 12 volt constant / black is 12 v switched / yellow, blue is the pulsar coil / green are ground.
« Last Edit: December 18, 2014, 08:55:28 AM by zombie »
Logged
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

miller10

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: Need some help with ignition lock
« Reply #2 on: December 18, 2014, 09:17:17 AM »
o.k. as I understand it has the same wiring as Kymco Super 9 LC
Logged

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: Need some help with ignition lock
« Reply #3 on: December 18, 2014, 09:31:06 AM »
They are all the same. :)

The key does nothing but continues power to the rest of the bike, and remove a ground from the CDI. It's nothing like a cars set up.

Post back how you make out.
« Last Edit: December 18, 2014, 09:35:20 AM by zombie »
Logged
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

miller10

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: Need some help with ignition lock
« Reply #4 on: December 19, 2014, 01:27:26 PM »
I connected the lock as shown on picture above and the scooter is making noise but wont start.

I've changed the spark plug and now I'm charging the battery. I remember that I had the same problem with the original exhaust and no problem with LEOVINCE Hand Made- GY6 (4-stroke) exhaust.
Logged

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: Need some help with ignition lock
« Reply #5 on: December 22, 2014, 11:51:00 PM »
Check the compression/spark/fuel.

Keep us updated please.
Logged
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...
Pages: [1]
« previous next »