Welcome here!
There is to say that:
our 500i are pretty picky on starting voltage, all under 11 VDC is not acceptable for this electronic
- I put a second skyrich battery in front of the other one
-is your LiFePo4 fully charged?
-does your rectifier/regulator work properly?
is your ground connection to engine block in posh condition?
With all this done never had probs even minus 3°C to start.
Ignition on, headlight on ca.20 seconds (batt warms up), headlight off, start engine.
Pls see link
https://www.kymcoforum.com/index.php?topic=33615.msg236331#msg236331Edizione italiane.
Benvenuti!
C'è da dire che:
le nostre 500i sono piuttosto esigenti in termini di tensione di avviamento, tutto sotto gli 11 V CC non è accettabile per questa elettronica
- ho messo una seconda batteria Skyrich davanti all'altra
- la tua LiFePo4 è completamente carica?
- il tuo raddrizzatore/regolatore funziona correttamente?
Il collegamento a massa del blocco motore è in buone condizioni?
Con tutto questo fatto non ho mai avuto problemi nemmeno a meno 3 °C per l'avviamento.
Accensione inserita, fari accesi per circa 20 secondi (la batteria si riscalda), fari spenti, avvio il motore.
(Vedi link perfavore)
https://www.kymcoforum.com/index.php?topic=33615.msg236331#msg236331