KymcoForum.com

Scooters - 125 to 300 => Downtown 300 => Topic started by: Syl on March 06, 2012, 10:31:20 PM

Title: High Pressure Wash for my DT 300i
Post by: Syl on March 06, 2012, 10:31:20 PM
I would like to use the hand held "High Pressure Wash" for my scooter but am not knowledgeable if that can be done & if certain parts have to be covered or avoided. I have no idea of covering or avoiding anything other than covering or protecting the instrument panel. Do any of you practice this wash and how does everything work after doing so? Appreciate your knowledge of this.
Title: Re: High Pressure Wash for my DT 300i
Post by: roboscoot on March 07, 2012, 04:51:52 AM
i have used a power washer....but you need to be very careful.......and keep your distance from the scooter......use mostly for the wheels......and actually cover up a good part of it with water proof canvas cover.......i think though most would tell you not to use at all...and simply hand wash......
Title: Re: High Pressure Wash for my DT 300i
Post by: oldcoastie on March 07, 2012, 05:06:57 AM
don't do it, Syl!

resist that urge! chances of getting something wet that doesn't like to be wet is too high!

(ymmv)

I tend to "dust" my bikes mostly... actually I use Meguire's Quick Detailer... the only thing I drizzle water on is the wheels (and I mean "drizzle")... there are so many little electrical connections and those connections may happily work for time immemorial if unmolested by water seeping into some little minor hairline crack in some covering that you would never ever know about if it did not get wet...

but then I don't ride much in any kind of soupy weather... and the bike is in the garage...

what kind of dirt you got on there that needs power washing?
Title: Re: High Pressure Wash for my DT 300i
Post by: Syl on March 07, 2012, 07:00:36 AM
Well, not a much type dirt other than the splashing areas, wheel wells, tires, rims and foot rest areas. I think after the input, I am not going to use the power wash...thanks. I did loof forward though to the NO Spot rinse which comes out very easily and without pressure. I am talked into the hand wash again!....thank you. Going to 68 today possibly and I do know I'm going into the garage which is open already! Maybe to work with it also this afternoon! Good thing there is a exclamation to describe our feelings!
Title: Re: High Pressure Wash for my DT 300i
Post by: racewalker on May 06, 2012, 02:16:20 PM
I have always washed my scooters with a pressure washer. The one we use is set to about 1000 pounds pressure. Never had an issue. Wash it, dry the seat and ride away.
Title: Re: High Pressure Wash for my DT 300i
Post by: fshfindr on May 06, 2012, 11:51:02 PM
Hey Syl, I'm 73 or is it 74,  Anyway, did you remember why you were in the garage once you got there if you remembered to go.

Richard L.
Title: Re: High Pressure Wash for my DT 300i
Post by: zombie on May 06, 2012, 11:56:28 PM
Love ya Fish... God bless you BRO!
Title: Re: High Pressure Wash for my DT 300i
Post by: Vivo on May 07, 2012, 03:31:38 AM
In a country where there are lots of bikes, car wash shops here cater to scoots and bikes. They use pressure washers but with the nozzle adjusted to a fine mist only depending on the dirt/mud on the scoot. It takes almost an hour to clean a scoot, a lot less than a whole car, because they wash/shampoo ever crack and corner of the scoot. After washing, compressed air is blown to get rid of excess water, wipe dry and apply protectant to those black plastics.  All for around 95 U.S. cents. Oh, there's free coffee while you wait and a free wash on your sixth visit....
Title: Re: High Pressure Wash for my DT 300i
Post by: fshfindr on May 07, 2012, 01:35:05 PM
What country is that?

Richard L.
Title: Re: High Pressure Wash for my DT 300i
Post by: zombie on May 07, 2012, 11:43:22 PM
"It takes almost an hour to clean a scoot"

Hey Joe! Me luv u rooong time for .95

Sorry !
Title: Re: High Pressure Wash for my DT 300i
Post by: Vivo on May 08, 2012, 01:34:21 AM
What country is that?

Richard L.

I'm from the Philippines, fsh. Time here is slow and we savor every bit of it.

@Zombie:  I'm not kidding on taking almost 1 hour to clean a scooter. It's not a 1 step process and they use different kinds of cleaners. The reason behind this is that the car wash business is a very good business. People pamper their cars and bikes here and every wash shop have to have a promo or gimmick to lure in customers. Some have big screen tvs (watch while you wait), billiard tables, free coffee, free juice, 5+1 promo and the like, etc.   There are even portable or mobile car wash on the mall parking lots. "We wash and wax your ride while you shop".
Title: Re: High Pressure Wash for my DT 300i
Post by: zombie on May 08, 2012, 03:41:17 AM
Sorry for the bad Humor. It's the same here... There are auto "spa's" for detailing... I take several hours to detail mine, and I still miss more than I get. I just can Never pay anyone to do it cause i'm CRAZY about people messing sh** up.
Title: Re: High Pressure Wash for my DT 300i
Post by: Vivo on May 08, 2012, 06:00:10 AM
Yes, detailing.  There is a car wash just at every corner here and they're really cheap. They do a very good job, you don't need detailing.
Title: Re: High Pressure Wash for my DT 300i
Post by: zombie on May 08, 2012, 06:25:49 AM
Nothing here is cheap. If it's cheap there is a reason. Usually a bad one.
Title: Re: High Pressure Wash for my DT 300i
Post by: Kymcocro on May 13, 2012, 09:16:27 AM
I have washed my DT with high presure hundred times,and have had no any problems.Don`t have time to waste.2 minutes washing,seat drying,and go.
Title: Re: High Pressure Wash for my DT 300i
Post by: Vivo on May 15, 2012, 01:25:44 AM
I have washed my DT with high presure hundred times,and have had no any problems.Don`t have time to waste.2 minutes washing,seat drying,and go.

I have all the time to pamper my rides.. ;)  Love it and it will love you back....