KymcoForum.com
General => General Discussion => Topic started by: Stig / Major Tom on September 11, 2025, 08:36:51 PM
-
Daughter c/o poor headlights on her car.
(https://i.postimg.cc/3JNjKW5W/20250911-124428.jpg)
This product cleared the clouded plastic covers on xB.
(https://i.postimg.cc/905k6SQt/20250911-132152.jpg)
(https://i.postimg.cc/mkv7XNdq/20250911-140426-Copy-2.jpg)
(https://i.postimg.cc/Mp8LPgFW/20250911-141607.jpg)
Pretty simple to use. $17 Home Depot.
Tape, wipe 4X each headlight. Hand wet/sand 3 mins X 2. Wash, dry. Apply sealer.
My daughter was impressed - she says usually when I head out the garage to "launch a missile, or something".....there are problems.
True enough.
But, not this time.
Would this work to clear a scooter screen? Or are they a different kind of plastic?
Stig
-
using toothpaste is supposed to work, never tried it myself
windscreens, I dunno, is it the same plastic, I know I have Lexan on my UTV, coulda got it in acrylic, not sure what the Givi on my AK550 is
-
Stig yes, can confirm that works on scooter headlamps AND windscreens.
Did several KYMCO Grand Dink/ Dink and XCiting clear plastic screens. Works on faded former SHINY scooter tupperware too.
But have a try on a non too visible spot first.
Toothpaste works only if decoloration/yellowing is very light and not deep.
-
Stig yes, can confirm that works on scooter headlamps AND windscreens.
Did several KYMCO Grand Dink/ Dink and XCiting clear plastic screens. Works on faded former SHINY scooter tupperware too.
But have a try on a non too visible spot first.
Toothpaste works only if decoloration/yellowing is very light and not deep.
Thanks for that Ruffus!
Yeah - all kinds of kits, and home recipes out there (8 grades of sandpaper, then Clam chowder, etc.) for clearing headlights -
As you can see - follow simple directions and this stuff works. Enough in the box to do 4 headlights, easy. How long will it last? Who knows - dealer installed new headlights quote @$1,000.00 - but they weren't certain. No one has ever had it done!
@$250.00 for a pr of Chinese parts - and sure, Toyota sources theirs from China, too - but they vet that company for quality.
Some work to install them....so tried this first.
I recon it is the sun causing most of the damage??
(my Night-Rider Scoots should last a long time :)
Stig
-
nice job on the headlights! Yes, it is the sun's UV rays that yellow the headlights. Cars that live in a garage may never develop the cloudy headlights. It will appear again, quickly, if you don't use a UV protectant / sealer.
I did this to my daughters' Pontiac Vibe..went from cloudy yellow to crystal clear. Used the Turtle Wax kit. Now, 7 months later, after sitting outside all day in the south facing sun, they are yellowing again.. :(
New Chinese headlights are about $130 or $150? Will just re polish the headlights using a different kit next time (hear the Cerakote kit is very good).
-
Second thought on this subject:
For a scooter windscreen you need two of this sets to get the whole surface properly done. I reglazed a GRAND DINK screen and had to do the inner side too because of microscratches all over.
Don't know exactely anymore, but took me for sure 3 to 4 hours of cleaning, sanding and varnishing.
The result was not 100% for it had very tiny bubbles at the edges ( not really visible, but..)
So, a new aftermarket piece from FACO or GIVI is here from € 85,- to € 115,-
-plus two sets of lens renewer cost around € 40,-
Overall a couple hours of work, IMHO it does not stand for, eben its possibly.
My resume: headlights yes, windscreens no.
-
Second thought on this subject:
So, a new aftermarket piece from FACO or GIVI is here from € 85,- to € 115,-
-plus two sets of lens renewer cost around € 40,-
Overall a couple hours of work, IMHO it does not stand for, eben its possibly.
My resume: headlights yes, windscreens no.
My thoughts exactly Ruffis, at some point the Law of Diminishing Returns kicks in and you'd be better off buying a new screen!
-
My thoughts exactly Ruffis, at some point the Law of Diminishing Returns kicks in and you'd be better off buying a new screen!
It took 13 yrs for her headlights to get like this.
Not knowing what quality headlights we'd get from Alibabba... priced %50 of genuine Scion ( Toyota), decided to try DIY first. They fog up again, we'll buy Chinese and pop will take a shot at the installation.
This kit is done in under 30mins. You are advised not hand sand more than 3mins each with the two grades of discs.
Stig
It's been a quality purchase.
-
those headlights look fantastic! Does the car live outside in the sun? Keep us updated through the next 6-12 months to see if they continue looking that good. Cerakote makes good stuff.
-
If you look on You Tube you can find a channel called Project Farm, where he tests about everything made in side by side comparisons with other brands. Very deep testing. Cerakote seems to be at the top of the pile.
-
I used to use toothpaste on the headlights of my Yaris to get it through MOT once a year. It needs reapplying a few times a year. Not sure how it would work on a scooter screen!
-
If you look on You Tube you can find a channel called Project Farm, where he tests about everything made in side by side comparisons with other brands. Very deep testing. Cerakote seems to be at the top of the pile.
Yeah - when in doubt I go to youtube. There discovered my truck's heater-blower motor was a quick fix w/o dismantling the dash!
Some stuff I learn will be more than I want to get into...so don't fiddle wid it.
And, I bought Cerakote after some 'tubes.
Stig