KymcoForum.com
General => Technical | How To => Topic started by: Stig / Major Tom on July 24, 2025, 02:59:04 PM
-
(https://i.postimg.cc/3NhX0MXs/LIKEBlack5.jpg)
The helmet and the mirrors here are Italian.
Scooter is Chinese made......
and this one is from sunny Vietnam.
(https://i.postimg.cc/L4J1V36q/20250429-061153.jpg)
Stig
-
Should be less temperamental then Stig?
(Have I recounted the tale from my dear old friend Foxy, now gone sadly, on this? His quip was always "I never owned a mobile [cell] phone or had a breakdown recovery subscription until I owned a Ducati!")
-
Have to say, IF Ducati would have in one of their new bikes a cardanic drivetrain, I would be tempted.
-
Have to say, IF Ducati would have in one of their new bikes a cardanic drivetrain, I would be tempted.
“cardanic drivetrain” had to Google that Ruffus! Only bike I had with shaft drive was the BMW K100RS. Comfortable machine, but had it cut out at walking pace, shaft locked & toppled me off nearly breaking my ankle! (Thank goodness for my Frey Daytona boot!). Put me off shaft drives.
-
Neil, interesting to hear about this broken shaft and resulting accident.
I'm on this kind of propulsion for more than 50 years (BMW, YAMAHA, HONDA, MOTO GUZZI) and even very neglected ones I saw worn out but never completely destroyed/torn apart within its shank.
-
Italian ? my GIVI windshield on my AK550, my shop vice(s) Capri Tools, my eyeglass frames, and my Vibram 5 fingers
(https://www.5doigts2pieds.fr/blog/wp-content/uploads/2024/08/vibram-five-fingers-scramkey-unisex.png)
-
Neil, interesting to hear about this broken shaft and resulting accident.
I'm on this kind of propulsion for more than 50 years (BMW, YAMAHA, HONDA, MOTO GUZZI) and even very neglected ones I saw worn out but never completely destroyed/torn apart within its shank.
No I didn't make myself clear Ruffus. The bike stalled and it was the engine stopping locked the shaft, causing everything to come to an immediate stop and me to topple over! The original mistake was mine in not giving a cold motor sufficient revs... Mea Culpa So no blame on the shaft which was fine.
-
No I didn't make myself clear Ruffus. The bike stalled and it was the engine stopping locked the shaft, causing everything to come to an immediate stop and me to topple over! The original mistake was mine in not giving a cold motor sufficient revs... Mea Culpa So no blame on the shaft which was fine.
Ah yes, understood. This K-inline four do have some compression which is not to overcome by rolling, particular cold lubrications. Blocks easily.
-
Ah yes, understood. This K-inline four do have some compression which is not to overcome by rolling, particular cold lubrications. Blocks easily.
Which was exactly what happened. Ouch!