KymcoForum.com
Marketplace => For Sale => Topic started by: mdvpyn on May 15, 2017, 04:57:47 PM
-
I have some Kymco scooters that I want to part out. None of them are complete bikes since I used parts off them to fix other Kymcos that I own and ride.
2013 Downtown 300i, Good motor, seat, mirrors, gauges, switches, electronics more. crashed hard in front.
2006 People 250,
2006 Bet and Win
2009 People S200
2009 Xciting 500 Good motor, mostly complete
2006 Xciting 500 motor knocks, complete otherwise.
2006 Grand Vista Runs but carb is bad.
I'm not able to ship larger items because I'm freshly out of back surgery and can't lift more than 5 pounds. So you would need to pick up near Palm Desert CA. in So Cal. As time goes by I will recover (I hope) and may be able to do more.
-
Hey !
Good to see you here on the forum !
I had responded to your Craig's ad, a week or so ago...
I am still interested in purchase of a Kymco motor assembly, yet Palm Desert is right on the edge of an awkward distance.
I've been through destroying my back and understand how rough it can be... in spades!
I have managed to recover, and hope you shall also.
Do it your way ! is the best advice I can offer.
redk
-
price on the complete downtown 300i motor/ecu/harness?
-
Price on motor/ecu/harness plz and the plastics? Have a friend I am trying to get the parts for.
Deedah
-
I'm interested in the gauge, speedometer, etc unit for the 2006 Bet and Win (250) If you do how much $ you want for it?
-
This thread is old, but I’m looking for a downtown seat
-
You still there? Any DT300I stuff left? Maybe reg-rectifier?
-
Hey Mick,
You mentioned that you had the seat on your DT 300 altered to remove the hump/lumbar support. Is it for sale?
Stu
-
My apologies to everyone. As a newbie, I though I would receive a pm from anyone interested in parts and so I missed all your questions. Likely it is too late for anyone now. Sorry again.
-
Stand by ! You may get replies to your parts offerings - but do be prepared to reply to them this time.
Stig
-
Hi if the Stator for the B&W/People 250 is interchangeable with the Xciting 250 I would be interested in getting a price for that.
-
Do you have a battery cover for an Xciting 500?
Sent from my moto g(6) play using Tapatalk
-
do you still have any 500 cc parts? thanks
-
Im looking for a front fender for a 500Ri if you have one ?
-
I see your post is old but hope its still valid . I'm looking for an exhaust, clutch and variator rollers for a 2006 - Kymco People 250. I hope you can help.. Haveva great day.
-
Price on reg-rect, ECU, one or both headlight assemblies for the Downtown 300i, please. Do you do paypal?
-
Price on reg-rect, ECU, one or both headlight assemblies for the Downtown 300i, please. Do you do paypal?
Karl, his last post was nearly 2yr ago.
Stig
-
Yeah, it was. Hey, nothing ventured...
-
Yeah, it was. Hey, nothing ventured...
Y'know.... there's this guy who borrowed 30 dollars MPC from me in Danang a few years ago when I was waiting to board the Freedom Bird back to The World.
Might do a google search for him - with interest could be a chunk of MPC's!!!, .....nothing ventured....
Thanks for the idea!
Major Tom
-
Be advised, sir, I HAVE dealt with Majors before! Wasn't pretty....Har, har!
There was this Marine Major, aviator, helo pilot raving about the H-46 simulator at Imperial Beach Naval Air Facility south of San Diego bay. He raved on how it was so realistic it was JUST LIKE being in the actual machine! I asked, "Does it vibrate and smell a lot?" Everyone at the table snickered loudly and he left in a huff! Oh, well...what can you expect from a knuckle dragging Mustang Naval snipe-type surface puke? Har, har!
-
Be advised, sir, I HAVE dealt with Majors before! Wasn't pretty....Har, har!
There was this Marine Major, aviator, helo pilot raving about the H-46 simulator at Imperial Beach Naval Air Facility south of San Diego bay. He raved on how it was so realistic it was JUST LIKE being in the actual machine! I asked, "Does it vibrate and smell a lot?" Everyone at the table snickered loudly and he left in a huff! Oh, well...what can you expect from a knuckle dragging Mustang Naval snipe-type surface puke? Har, har!
Wife and I were invited to my father's reunion dinner held one evening in the US Air Force museum. Sitting at a large table with his old flight crew. I remember a joke about a hopeless navigator....and then someone pointed to one of the many WWII planes parked around us, "Remember Old Shakey over there?"
They all nodded and laughed.
Pretty cool place for a steak dinner*, and with an interesting and amusing group of old guys!
(* catered by the Bob "Hope Hotel" at Wright Patterson AFB.
Stig
-
That had to be a great event! Didja happen to notice the aroma around machinery like that? We were at the museum at Chanute AFB some years back. The front 25 feet had been cut from a B-52 and set into a gantry to simulate its normal height in service and allow access to the forward stations. The flightdeck and other positions were surprisingly cramped for something that large and the fuel, lube, electrical and sweat aroma were unmistakable!
-
Aroma??
Sure....it's all through this massive museum. Of course especially noticeable in the "walk-through" aircraft.
I've been visiting the museum since it was much smaller, located elswhere....and consisted of many model airplanes.
Working at Wright Patt Field was pretty cool ...when Rif-d from the hosp, before landing the job with the county. The Dayton Vietnam Veterans counseling center got me the position at WPAFB through the base's Veterans Preference Program.
About 5 of us. I said, "you're too old to be doing this!".....they said, "No troop, you're too old to be doing this!"
Stig
-
What do you have left from the People 250? Any photos?
-
I am in need of an instrument cluster for Xciting 500. DO you have one. There are other small things but that one is my biggie.
I have some Kymco scooters that I want to part out. None of them are complete bikes since I used parts off them to fix other Kymcos that I own and ride.
2013 Downtown 300i, Good motor, seat, mirrors, gauges, switches, electronics more. crashed hard in front.
2006 People 250,
2006 Bet and Win
2009 People S200
2009 Xciting 500 Good motor, mostly complete
2006 Xciting 500 motor knocks, complete otherwise.
2006 Grand Vista Runs but carb is bad.
I'm not able to ship larger items because I'm freshly out of back surgery and can't lift more than 5 pounds. So you would need to pick up near Palm Desert CA. in So Cal. As time goes by I will recover (I hope) and may be able to do more.