Author Topic: I'm scrapping an 06 Agility 50cc motor parts and misc available  (Read 1977 times)

j4bs4209333

  • Newbie
  • *
  • Posts: 4
    • View Profile
I have a 2006 Agility 50cc that I am scrapping very soon. I'm going to end up putting it on the craigslist free section for the metal scrappers. If anyone needs anything off it before it goes let me know asap. No charge for anything you just need to pay for shipping. There's not too much left, I bought this bike from Craigslist as a parts bike for my other Agility. This one has what I was told is a good motor. I took the rear gears off it to replace my broken gears so it's a motor minus the part where the flywheel and clutch are. I took all the plastics and both kickstands. There's still handlebars, brake parts, wiring harnesses, frame parts, coil spring, misc electronic parts etc. If anyone needs anything let me know before I have the Craigslist metal junkies drag it away. Again you pay the shipping only, I got my moneys worth so I'm happy, plus if it wasn't for people's postings on this forum I wouldn't have ever been able to figure out how to get the damn clutch nut off so I'm happy to help out anyone else if they need parts. I'm in the Boston area so if you need to figure out shipping costs use the zip code 01960.

donut

  • Jr. Member
  • **
  • Posts: 62
    • View Profile
Re: I'm scrapping an 06 Agility 50cc motor parts and misc available
« Reply #1 on: April 25, 2012, 03:43:51 AM »
pm sent

donut

  • Jr. Member
  • **
  • Posts: 62
    • View Profile
Re: I'm scrapping an 06 Agility 50cc motor parts and misc available
« Reply #2 on: April 27, 2012, 10:47:34 PM »
here is a front and back picture of the "collar"? that is loose
sorry it took a couple days to post this




blue

  • Hero Member
  • *****
  • Posts: 3935
    • View Profile
Re: I'm scrapping an 06 Agility 50cc motor parts and misc available
« Reply #3 on: April 29, 2012, 01:23:52 PM »
ya ya ya mine is loose to I went up a size in the screw thats in there and added a very small drop of lock tight. a softer silcone well be better just so it well come off when it needs to.

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: I'm scrapping an 06 Agility 50cc motor parts and misc available
« Reply #4 on: April 29, 2012, 08:42:46 PM »
Blue Lok tite is best for Non Permanent fasteners.
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: I'm scrapping an 06 Agility 50cc motor parts and misc available
« Reply #5 on: April 30, 2012, 01:00:18 AM »
..how much for the whole she-bang?...
..every mod (action) necessitates a (reaction) mod..

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: I'm scrapping an 06 Agility 50cc motor parts and misc available
« Reply #6 on: April 30, 2012, 04:26:21 AM »
Road trip! Shotgun...Just dump it in Jersey j4bs4209333... Everything will be fine.
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: I'm scrapping an 06 Agility 50cc motor parts and misc available
« Reply #7 on: May 01, 2012, 12:41:57 AM »
...hell yeah!!!..


...parst is parts!!!
..every mod (action) necessitates a (reaction) mod..

j4bs4209333

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: I'm scrapping an 06 Agility 50cc motor parts and misc available
« Reply #8 on: May 02, 2012, 12:07:26 AM »
Jersey is a little too far to dump it. Anyone else need any parts? I'm getting sick of my cellar smelling like old gas. I still have the motor minus the exhaust and minus the rear gears. I have the rear seat, tire huggers, wiring harnesses, misc small electrical parts, throttle cable, brake cables, front caliper. I have the kick start cover with the kick start lever but the lever doesn't spring back for some reason, I'm not sure if it's any good.  I have some of the plastics from the 2010 bike if anyone needs them but some moron spray painted them black. I tried to get the black off with a pressure washer and it was working but I didn't have the patience for it so I took them off the parts bike. They were originally red. If anyone needs them I have the back plastic that goes around the whole back of the bike, the front headlight assembly with the plastic, front handlebar plastic cover, and the rear plastic cover that goes around where the ignition switch is. There's no decals on anything either, not sure if they painted over them or pulled them off. I also have the front seat and the under seat storage container. The plastic is fukd up though so the seat comes all the way off once unlocked. If anyone wants anything you pay the shipping and you can have the parts for nothing.
« Last Edit: May 02, 2012, 12:09:39 AM by j4bs4209333 »

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: I'm scrapping an 06 Agility 50cc motor parts and misc available
« Reply #9 on: May 02, 2012, 12:25:07 AM »
SLINGER!!!! Where You AT
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: I'm scrapping an 06 Agility 50cc motor parts and misc available
« Reply #10 on: May 04, 2012, 02:05:29 AM »
Anyone else need any parts? I'm getting sick of my cellar smelling like old gas


...boston is so far away...would love to have them tho....
..every mod (action) necessitates a (reaction) mod..

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: I'm scrapping an 06 Agility 50cc motor parts and misc available
« Reply #11 on: May 04, 2012, 02:12:44 AM »
Yo! Slinger... I sent a pm to J4bs, and am getting some of the parts. I have a ups account so I just sent the shipping labels, and will do the same for you if you want. I can D'load the label , and email it to you once you figure the size, and weight of the package(s). Approximate is ok. You can always Paypal me the cost whenever...
Send a pm to j4, and it is forwarded to his/her email.
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: I'm scrapping an 06 Agility 50cc motor parts and misc available
« Reply #12 on: May 04, 2012, 02:22:32 AM »
...i need a cvt cover, that the spring clip posts for the kickstart arent broken...and bottom end oem engine...and anything else available...
..every mod (action) necessitates a (reaction) mod..

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: I'm scrapping an 06 Agility 50cc motor parts and misc available
« Reply #13 on: May 04, 2012, 02:28:38 AM »
Don't tell me Bro... Pm j4b
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: I'm scrapping an 06 Agility 50cc motor parts and misc available
« Reply #14 on: May 04, 2012, 02:29:30 AM »
..okay..
..every mod (action) necessitates a (reaction) mod..

An Error Has Occurred!

Call to undefined function split()