Author Topic: Introducing Scarlett  (Read 1688 times)

cleanerman

  • Newbie
  • *
  • Posts: 40
  • Upper East TENNESSEE
    • View Profile
Introducing Scarlett
« on: July 24, 2018, 04:53:09 PM »
My new, to me, scooter is a red 2009 People s200 with 8,000 miles.  I have some questions and will try to ask each one separately in different posts so I don't get confused.

I'm going to put new tires on it and the rear looks like it will take some work to get to.  Does she need to be totally "undressed" to remove the rear wheel? 

Thanks.
2009 People S200, 2007 Honda
 Reflex, 2018 Vespa GTS300 Super

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7713
  • West Tennessee, USA
    • View Profile
Re: Introducing Scarlett
« Reply #1 on: July 24, 2018, 06:30:29 PM »
No. Right shock, brake, little hugger fender (if still there), and right "fork leg" meaning that cast plate between rear of engine and axle. Just tie up the brake caliper or set it on something so it does not strain the braided hose.
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

cleanerman

  • Newbie
  • *
  • Posts: 40
  • Upper East TENNESSEE
    • View Profile
Re: Introducing Scarlett
« Reply #2 on: July 24, 2018, 11:16:14 PM »
Thanks CROSSBOLT, but mine has a drum brake.  Do you take the right shock loose at the bottom?
2009 People S200, 2007 Honda
 Reflex, 2018 Vespa GTS300 Super

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7713
  • West Tennessee, USA
    • View Profile
Re: Introducing Scarlett
« Reply #3 on: July 25, 2018, 12:28:51 AM »
"Oops!" on the brake! Start at the bottom to see if it clears. Remove if the wheel is blocked by it.
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

Iahawk

  • Hero Member
  • *****
  • Posts: 2435
  • Eastern Iowa, USA
    • View Profile
Re: Introducing Scarlett
« Reply #4 on: July 27, 2018, 12:47:23 AM »
I wish it were this easy...plastic tub has to come off to get to right rear shock bolt...exhaust comes off, the metal brace between engine and axle comes off, hugger comes off...not a terribly complicated job, but it will take a while.

Do yourself a favor and do your sparkplug at the same time (see you post on changing the spark plug). Good luck.

2010 People S200 - sold after 8 wonderful years!
2014 Ninja 300
1996 Honda Helix
1984 Honda Nighthawk 650 - work in progress

An Error Has Occurred!

Call to undefined function split()