Author Topic: User manual and specifications on bike different (Transmission Oil capacity)  (Read 1900 times)

juancuesta

  • Jr. Member
  • **
  • Posts: 54
    • View Profile
Hello everyone,

I have a question , in the user manual of Kymco Xciting 250 2012 specifies that the amount of gear oil should be 0,18L.
However, when I changed the oil I realized that ther's an indication on the bike saying otherwise 0,23l.This indication is right next to the drain bolt and its on the metal itself.

Why those two things are different? what should I do?
« Last Edit: April 14, 2016, 03:23:54 PM by juancuesta »

xsel777

  • Hero Member
  • *****
  • Posts: 670
    • View Profile
I would personally fill it up until it starts overflowing from the filler hole. Then you know it is full,job done.

 Sent from my Samsung Note 3 with Tapatalk
2010 Kymco Xciting 500Ri-Dark Blue

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7713
  • West Tennessee, USA
    • View Profile
NO, no, don't do that! So far most all Kymco scoots have a specific amount to put in each gearbox and it is ALWAYS way less than the fill hole. I, from experience with my first Kymco, filled to the fill hole. That Agility 50 had an immediate, massive oil leak! Juan brings a real point about Kymco manuals: many mistakes and conflicts. Here is a suggestion: Use .23 L and if you wind up with an oil mess, wash it off and use .18 L. Not trying to be a wiseguy, really! Maybe someone who has experience with this model will educate us all.

Karl
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

Forbes1964

  • Hero Member
  • *****
  • Posts: 944
    • View Profile
I'm not sure about the Agility. But You can fill the Xciting 250 to the fill hole. That's how it was filled by the dealership. I found out when I drained mine. But when you fill it, let any overflow drain for SEVERAL minutes until it completely stops. That way, you'll have no leaks


Sent from my iPad using Tapatalk
2009 Xciting 250

Forbes1964

  • Hero Member
  • *****
  • Posts: 944
    • View Profile
When I filled it that way, I think I had used between 6 and 7 ounces which is between .18 and .21 liters.


Sent from my iPad using Tapatalk
2009 Xciting 250

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7713
  • West Tennessee, USA
    • View Profile
Ya might know this one is the exception! I stand corrected.

Karl
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

Forbes1964

  • Hero Member
  • *****
  • Posts: 944
    • View Profile
Ya might know this one is the exception! I stand corrected.

Karl
or maybe it's one of the RARE occasions where I was just lucky. 😀
2009 Xciting 250

juancuesta

  • Jr. Member
  • **
  • Posts: 54
    • View Profile
Got it! Ill open the "in screw" to make sure that there's not overfill! Thanks!

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7713
  • West Tennessee, USA
    • View Profile
Huh?

Karl
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

juancuesta

  • Jr. Member
  • **
  • Posts: 54
    • View Profile
Finally i found the correct answer

Forbes1964

  • Hero Member
  • *****
  • Posts: 944
    • View Profile
Finally i found the correct answer
So both amounts were right.
2009 Xciting 250

An Error Has Occurred!

Call to undefined function split()