« previous next »
Pages: [1]

Author Topic: measuring variator rollers  (Read 2375 times)

mrmike

  • Hero Member
  • *****
  • Posts: 810
  • Syracuse, NY
    • View Profile
measuring variator rollers
« on: July 23, 2012, 11:47:05 AM »
I have a 2010 Kymco people 150. I want a little more performance out of it, so I'm goint to install lighter rollers and a 1000lb clutch spring. I want to take it apart today and see what my stock rollers are. I have a postal scale to weigh them, but I don't know what measurements I need. How do I measure to ensure I order the correct rollers?
Logged
Blue '23 People S 150i ABS  Moto Discovery GPS bar, Shad SH33 top case, Iridium spark plug, Dr Pulley 11.5 sliders, Black reflective graphics, Battery Tender ring terminal cable, LED tag light. City Grip 2 tires 
      
Past  Kymco rides:  '10 People 150, '12 GTI 300, '21 X-Town 300i ABS

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: measuring variator rollers
« Reply #1 on: July 23, 2012, 09:40:24 PM »
..weight is in grams..

..can also measure diameter and width in mm to get the correct deminsions for your scoot..


..i think your oems are 15 grams and 18 X 14 mm....
« Last Edit: July 23, 2012, 09:48:41 PM by wordslinger »
Logged
..every mod (action) necessitates a (reaction) mod..

Calothrix

  • Sr. Member
  • ****
  • Posts: 341
    • View Profile
Re: measuring variator rollers
« Reply #2 on: July 24, 2012, 01:50:28 AM »
The OEM rollers in my 2005 People 150 are 18 mm x 14 mm x 15 g.  FYI, if you're considering going with Dr. Pulley sliders, I replaced my OEM rollers with 13 g sliders and they performed very similar.  So, if you're considering using sliders and you're looking for more low end acceleration, go with less than 13 g.
Logged
Pages: [1]
« previous next »