Show Posts
1
Bet & Win 250 / Kymco bet and win 250 New carb?
« on: May 01, 2025, 02:14:42 AM »
Hello,
Im having carburetor issues with my bet and win 250. Trying to get the scooter running this spring, ive taken the carb apart. When I went to reassemble, I noticed the carburetor bystarter E-choke was missing the cylinder and needle as shown in the photo attached.
In the past ive had the bike running but never been able to get it tuned quite right despite my many tries. The carb has stock jets. If I accelerated too quickly the bike would bog. When tuning the fuel screw at idle, I couldn't hear any change in RPM.
What are my options, buy a new carburator with a new bystarter or replace the bystarter and maybe get a rebuild kit? Ive been able to find rebuild kits that seem to match the carburetor gasket from my cvk30 carb but im not sure which bystarter would work with my carburetor or where I could purchase an entire carburator.
Thanks
edit:
Would this carburetor work?
https://a.co/d/gQ64Ufu
So I found the other side of the bystarter inside the carb. Ive ordered some alligator clips to test the bystarter and this generic bystarter from amazon https://a.co/d/4RwPTCS. If I can confirm the bystarter works I will ensure I try to tune the carb once its fully warmed up incase I was tuning when the carb was choked.
Im having carburetor issues with my bet and win 250. Trying to get the scooter running this spring, ive taken the carb apart. When I went to reassemble, I noticed the carburetor bystarter E-choke was missing the cylinder and needle as shown in the photo attached.
In the past ive had the bike running but never been able to get it tuned quite right despite my many tries. The carb has stock jets. If I accelerated too quickly the bike would bog. When tuning the fuel screw at idle, I couldn't hear any change in RPM.
What are my options, buy a new carburator with a new bystarter or replace the bystarter and maybe get a rebuild kit? Ive been able to find rebuild kits that seem to match the carburetor gasket from my cvk30 carb but im not sure which bystarter would work with my carburetor or where I could purchase an entire carburator.
Thanks
edit:
Would this carburetor work?
https://a.co/d/gQ64Ufu
So I found the other side of the bystarter inside the carb. Ive ordered some alligator clips to test the bystarter and this generic bystarter from amazon https://a.co/d/4RwPTCS. If I can confirm the bystarter works I will ensure I try to tune the carb once its fully warmed up incase I was tuning when the carb was choked.