Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - elmin

Pages: [1]
1
Downtown 300 / Re: Downtown 125i 2013 dead..
« on: November 13, 2020, 02:13:53 PM »
Quote from: CROSSBOLT on October 18, 2020, 12:27:26 PM
Based upon reading everything from the beginning you have something burned in two from the battery either red or black, + or-. It could be inside the terminal socket where the wire connects to the terminal. Probably a ground wire I am GUESSING the easiest ground connection was on the frame or engine. Will require careful inspection and testing.

Just small uodate. I bought new ECU,it is sold with throtle body,and it is not that problem,so ECU is fine..

Quote from: roxyflash on November 07, 2020, 01:52:28 PM
Check voltage at key switch
How can check voltage at key switch?

2
Downtown 300 / Re: Downtown 125i 2013 dead..
« on: October 18, 2020, 09:21:47 AM »
Yes,only one with voltage,H/L is working to but showing no voltage.

3
Downtown 300 / Re: Downtown 125i 2013 dead..
« on: October 17, 2020, 09:08:12 AM »
I checked fuses from the back,as I said before,3 of them not workin and no  voltage on them,other 2,MAIN 11.54V and H/L no voltage.

4
Downtown 300 / Re: Downtown 125i 2013 dead..
« on: October 16, 2020, 07:48:40 AM »
What can i do next?

5
Downtown 300 / Re: Downtown 125i 2013 dead..
« on: October 15, 2020, 03:09:36 PM »
Quote from: CROSSBOLT on October 15, 2020, 12:40:31 PM
Well, you have something that has "burned in two" or destroyed. Now, we are trying to find out what it is, cheap or expensive.

Thank you for your advices.. What can I do,it is a mistake that i will learn from it..
Do you think now it could be ECU?

6
Downtown 300 / Re: Downtown 125i 2013 dead..
« on: October 15, 2020, 11:50:00 AM »
Quote from: Stig / Major Tom on October 14, 2020, 07:01:47 PM
When jumping with another,  known good,  battery....might try removing both  pos and neg wires from battery. Now attach these wires to your jumper source.
In other words - remove "sparky" (your old battery) entirely from the start attempt process.
Just a thought...
Stig


Still the same,I jumped from another battery directly  to the wires,red and blak,nothing..

7
Downtown 300 / Re: Downtown 125i 2013 dead..
« on: October 15, 2020, 05:51:29 AM »
How can I troubleshoot fuses,they are good.

8
Downtown 300 / Re: Downtown 125i 2013 dead..
« on: October 14, 2020, 01:21:46 PM »
yes,curently it is 11.5v, it is a bit low power but even if I jump it from another battery it is the same.

9
Downtown 300 / Re: Downtown 125i 2013 dead..
« on: October 14, 2020, 05:41:21 AM »
From the battery,not sure if that was negative od positive port and at the same time everything else went off.

10
Downtown 300 / Re: Downtown 125i 2013 dead..
« on: October 13, 2020, 08:04:36 PM »
Still all the same  :-\ no signs of el.power..

11
Downtown 300 / Re: Downtown 125i 2013 dead..
« on: October 12, 2020, 03:03:28 PM »
First of all,thank you guys so much for helping me..
I checked red line (battery,relay,fuse box) all good,and black one too,battery to the point where is fitted to the frame of scooter,all good..
What I noticed is that all 5 fuses are good,but response is coming only from 2, H/L 15A (don't know the meaning) and CHARGE 30A,rest of them FAN 10A,IGNITION 10A,MAIN 15A, nothing... !?

12
Downtown 300 / Re: Downtown 125i 2013 dead..
« on: October 11, 2020, 08:27:18 PM »
All fuses are checked and they are good,30 amp one too..

13
Downtown 300 / Re: Downtown 125i 2013 dead..
« on: October 11, 2020, 08:07:13 AM »
Nothing at all,it looks like power is cut off completely,but battery is ok..

14
Downtown 300 / Downtown 125i 2013 dead..
« on: October 10, 2020, 07:43:08 AM »
Hi everyone,
i am new here and have no idea where to start and whome to ask,so sory for that.
i have downtown 125i and last day tried to jump it from another battery and friend mixed the polarities and some sparks came up and scooter died.
I checked fuses,battery still good 12 v..
Could it be that ECU died?
thanks a lot..

Pages: [1]