Show Posts
1
Downtown 300 / Re: How to check faulty ISC on DT300
« on: February 09, 2021, 01:08:56 PM »
I do not know if this can help you.
TPS/ISC RESET PROCEDURE
1. Put the side stand up and engine stop
switch is at “RUN”.
2. Turn the key to the OFF position.
3. Fully open the throttle.
4. Turn the key to the ON position.
5. Release the throttle after waiting for eight
seconds.
6. Turn the key to the OFF position.
7. Turn the key to the ON position.
8. TPS and ISC have been reset successfully.
If fail to reset, repeat the steps from 1 to 8.
TPS/ISC RESET PROCEDURE
1. Put the side stand up and engine stop
switch is at “RUN”.
2. Turn the key to the OFF position.
3. Fully open the throttle.
4. Turn the key to the ON position.
5. Release the throttle after waiting for eight
seconds.
6. Turn the key to the OFF position.
7. Turn the key to the ON position.
8. TPS and ISC have been reset successfully.
If fail to reset, repeat the steps from 1 to 8.