Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - airshot

Pages: 1 2 3 [4] 5 6 ... 78
46
Side By Side / Re: 2014 crank but no start
« on: November 27, 2022, 05:42:24 PM »
the UXV450i does not require depressing the brake pedal when in neutral. When starting in gear, or park, you must depress the brake.

Out of habit, I always push the brake pedal, needed or not!!  I rarely use neutral, just leave it in gear due the the sometines difficulty of changing gears when sitting.  After 7 years of ownership I just do things from habit....if anyone ask what my starting proceedure was, I would have to think about it,   old habits dont take much thought !!

47
Side By Side / Re: 450i UTV Fuel Filter?
« on: November 26, 2022, 09:28:19 PM »
Forgot about the tire question. Article I read many years ago discussing all terrain tires stated offroad miles wore tires out way faster than pavement. The reason being was that sand/dirt is very rough. Can't remember all the details but a grain of sand/dirt has many different sharp edges. My UXV 700i has maybe 3/4 of the tread left with just over 1k miles. Mine mostly runs in grass, yard, road right away (grass), 15% dirt and maybe 10-15% pavement. If it continues, I might get 2.5k or more out of my factory tires.
Different tires have different hardness of the rubber,  soft rubber will wear faster and most original tires are soft.  One reason I went with the SunF tires is they are a harder rubber and reports are they wear better, especially on pavement.  RandyO has had great luck with road tires on all surfaces....they are of a much harder rubber than off road tires.  You dint need sift rubber to get good traction like mfgrs want you to believe.....they just want to sell you more tires!!!  Lol

48
Side By Side / Re: 2014 crank but no start
« on: November 26, 2022, 09:20:52 PM »
Your best bet is to get a factory service manual and go from there.  You need to start with basic testing..."battery good" is not a test, we need actual numbers like 12.6 volts.  "Good spark" means nothing, spark will jump a 1/4" gap and is blue not yellow, that is a test result. Etc...real test numbers are needed.  Next thing is a real compression test with numbers....

49
General Discussion / Re: Kid on Tmax
« on: November 26, 2022, 09:13:23 PM »
When an accident happens and the poor kid gets injured, Dad will want to blame and sue the scooter mfgr !!!!   Dad is an idiot, unfortunately he probably votes as well !!!

50
Side By Side / Re: 450i UTV Fuel Filter?
« on: November 23, 2022, 11:02:31 PM »
Brought my machine into the garage to get it ready for winter...looked all over the fuel system, hoses, pump etc and no sign of anything that looks like a filter.  If any otger owners have found one, hopefully they will chime in here and let us know.  If there is no filter, I will consider adding an inline somevwhere in the system.  Never gave it a thought until you brought it up...thanks for getting my attention.

51
Side By Side / Re: 450i UTV Fuel Filter?
« on: November 23, 2022, 04:12:59 AM »
I also have a 2015 model 450i and it gas been a great machine!! As far as a fuel filter....I dont know but will look it up in my service manual.  If there isn't one, time to put an inline filter in the fuel line.  Old fuel can cause issues, drain or siphon as much as possible and add fresh.  My rubber cap on the coolant bottle is also dry and cracked, coated it with silicone grease to keep it from getting worse.  Looking for an expansion plug to replace it with.  My stick tires were replaced around 1800 miles, worn but not bald, saved them onto spare rims to use when pavement riding.  I live in the coyntry and we can ride on the back roads..   I replaced mine with SunF AO33 bias ply tires.  Have a few hundred miles on them, no complaints.  Work well in snow, quite and smooth on pavement.  Havent been in deep mud but confident due to snow performance. The nice partbisvthey are not that expensive, and have really stiff side walls.  In fact you can run them with O air pressure at slow speed if you get a nasty blowout you cant fix on the trail !!!  They are also a true 25" tire, mabey even plus a little. I always use fuel conditioner in my SxS and my boat, never had an issue with either !! Will be getting my soft side enclosure and plow mount on so it is ready for winter snow plowing, cant wait, fun times plowing snow!!

52
Side By Side / Re: Kymco 450i Side-By-Side Plow
« on: November 12, 2022, 10:32:30 PM »
They probably said no because they didnt have anything !! I also own a 2015 model and I have a plow and a cab enclosure long with a winch.  When I bought mine in late 2015, nobody was making bolt-on plow kits so I made my own. I did not want a front mount due to excess stress on the front of the frame (my opinion) so I made a mid frame mount which ties all three crossmembers together to distribute any stress. Then I added a Pile Driver quick attach plow and push tube.  Probably overkill for my machine but definetly heavy duty.  My machine already had a winch plate mounted, so added a KFI 2500lb winch and ready to plow!  I also added a Pacific Eagle cab enclosure to stay warm while plowing.  Been an excellent tool for plowing my 300 plus ft drive.  In fact I look forward to plowing....if we could only get snow without the cold!!!   Lol....

53
Side By Side / Re: Need New Wheels
« on: November 05, 2022, 12:00:11 AM »
As long asvthe hole pattern and offset is the same you will be fine. Try and match the rim width if you can but not a critical dimension.
I picked up a set of Yamaha rims as spares to mount my old tires on, when I bought new ones.

54
Side By Side / Re: Snowplowing
« on: October 28, 2022, 04:45:44 PM »
When I was working, snow wasnt as much fun as getting thru it to get to work took the fun out of it.  But now that I am retired and have my buggy with a heater and winter enclosure....bring on the snow !!!    No getting to work worries now just play time, ironically we have had some of our lowest snow falls on record since I retired and have my snow plowing toys.....just my luck !   Send some snow my way if you ever get to much.......

55
Unfortunately most have mental issues, it has been proven many times over that when they are taken off the street and given the necessities to take care of them selves, most return to the street. In my younger days there were numerous organizations trying to get the himeless off the streets but in most cases proved to be futile.

56
Side By Side / Re: Snowplowing
« on: October 25, 2022, 10:57:16 PM »
Glad to see you have it up and running, but snow already??  Wow, we are lucky to see a small snow after thanksgiving to early Dec.. never get plowable snow until mabey late Jan or around here, Feb is snow plowing month.  While I enjoy plowing, not yet ready for the cold temps.  I would like to find a place to live where we could have snow with temps in the 60's......lol...

57
Side By Side / Re: Snowplowing
« on: October 24, 2022, 01:39:49 AM »
Do you have a front mount for your plow or a mid mount ?  Just curious as I have heard complaints about frame damage from front mounts.  When I made my mid mount, I tied three crossmembers together as support for the mount.  Knock in wood...so far so good!!

58
Side By Side / Re: 2014 uxv700i will not start
« on: October 16, 2022, 04:07:13 PM »
Any chance the flywheel key may have sheared?  Your issue description fits a sheared key in outboard motors !!!  Not uncommon to find.  Good luck and keep us posted..

59
Side By Side / Re: 2018 Kymco starter problem.
« on: October 10, 2022, 10:37:17 PM »
Not sure about the 500 as I have a 450, but....if it were mine, I would pull the starter and test it.  While it is out, you can clean and relube the clutch.  Clean the electrical connections etc !!  New starters are not Cheap, hopefully you can get it sorted out....

60
Side By Side / Re: 2008 Kymco 500 UXV hard start when engine is warm
« on: September 28, 2022, 05:17:54 PM »
Along with checking the valve clearance, your carb might be in need of a rebuild. Being a 2002 your carb needle is probably hanging open and causing flooding when you shut it off, the fuel continues to flow, causing a wet fouled plug...thus the need to hold the throttle wide open to get it to start. Make sure your plug wire can jump a 1/4" plus gap!!  You could try running some heavy doses of Sea Foam thru it in hopes that it might disolve the crud, but in reality, probably time for a thorough carb rebuild.

Pages: 1 2 3 [4] 5 6 ... 78