Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - mamo

Pages: [1]
1
Downtown 300 / Re: ROLLER COMP WEIGHT
« on: February 07, 2015, 02:57:26 PM »
agilebda,

Thank you very much for your advice.

I thank for information of agilebda. I want to examine it.

2
Downtown 300 / Re: found these on ebay. thoughts?
« on: January 28, 2015, 03:28:42 AM »
Hello,donjack

I was attached at last.
But a terrible explosion became the next problem. :-[
What kind of method do you coordinate a sound by?


3
Downtown 300 / Re: ROLLER COMP WEIGHT
« on: January 21, 2015, 10:11:00 AM »
I hesitate about 12 g or 13 g or choice. :-[
How much will the engine revolution per minute at the time of the start become when I make 12 g?

4
Downtown 300 / Re: found these on ebay. thoughts?
« on: January 21, 2015, 09:53:38 AM »
Hello,donjack　  ;D

I'm sorry many times.
When I attach it outward than now, does it come in contact with a fender?

5
Downtown 300 / Re: found these on ebay. thoughts?
« on: January 21, 2015, 04:40:51 AM »
Hello,donjack　 ;D
Always thank you.

6
Downtown 300 / Re: found these on ebay. thoughts?
« on: January 20, 2015, 02:49:54 AM »
Hello donjack ;D
Thank you for communication

"CREE U5 LED "is a good product.

It is three questions by addition.
1.Why did you have to remove bottom part of "the cage"?
2.In which device, do you change three phases of illumination of "CREE U5 LED "?
3.Did the + power supply connect it from battery directly?

7
Downtown 300 / Re: found these on ebay. thoughts?
« on: January 19, 2015, 07:49:49 AM »
To donjack　 ;D

You attached a projector light, but how did the power supply do it?
I want to remodel it like your motorcycle, too.
When I attach it, I want you to advise an art and matters that require attention.
I want to ask about the specifications of the light which you attached.

8
Downtown 300 / Re: found these on ebay. thoughts?
« on: January 07, 2015, 03:02:01 AM »
Hello, donjack
What kind of feeling is the volume of sound of your "18 "Stainless Steel Muffler Silencer Exhaust Slip-on?"
I took "Exhaust Muffler Silencer Slip-on MINI 8", but have not been yet attached.
I do my best this weekend and am going to attach it.

9
Downtown 300 / Re: found these on ebay. thoughts?
« on: January 06, 2015, 01:55:06 AM »
Hello donjack
A connection part seems to narrow when I watch your image.
I want you to watch the image that I took off an original silencer.

https://box.yahoo.co.jp/guest/viewer?sid=box-l-fdwzlo25glsn6kokxrmdykddq4-1001&uniqid=57c3b5c8-f98e-494c-a3e4-7b50d8452226&viewtype=detail#du%3D57c3b5c8-f98e-494c-a3e4-7b50d8452226%26ds%3Dbox-l-fdwzlo25glsn6kokxrmdykddq4-1001%26tu%3D57c3b5c8-f98e-494c-a3e4-7b50d8452226%26ts%3Dbox-l-fdwzlo25glsn6kokxrmdykddq4-1001%26vt%3Dpublic%26lf%3Dthumbnail%26ls%3D1%26lm%3D20%26il%3D1

Does a connection part narrow in the same way when I remove silver joint gasket of my exhaust pipe?

10
Downtown 300 / Re: found these on ebay. thoughts?
« on: January 05, 2015, 02:23:14 AM »
To donjack　 ;D

When you took off an original silencer, I thought that an original exhaust pipe was accompanied by a joint gasket thick, but did you remove it?

The outer diameter of the exhaust pipe was 35mm when I measured it.
It was 37mm in the state with the joint gasket.
May it be said that the exhaust pipe of my machine is bigger than the exhaust pipe of your machine?

11
Downtown 300 / Re: found these on ebay. thoughts?
« on: January 05, 2015, 02:05:40 AM »
Thank you for donjack. ;D

I watched a photograph.
It was carved a seal 32-35mm and size by a muffler belt, and the thing which I was donated to was the same.
However, the original exhaust pipe of my Downtown had an outer diameter of 37mm and I was connected and challenged it, but was not its size at all.

12
Downtown 300 / Re: found these on ebay. thoughts?
« on: January 05, 2015, 01:53:42 AM »
Do not misunderstand it. :-[
Because it is a slip-on type, header pipe is not bundled.
It links header pipe (original exhaust) and the silencer to the link pipe.

I ordered manufacture from a different production supplier, but cost 10,000 yen for Japanese Yen.

13
Downtown 300 / Re: ROLLER COMP WEIGHT
« on: January 05, 2015, 01:45:47 AM »
Hello! Thank you for all communication.
I thank for de dee, windwheeler, Goodrich. ;D

The mother that there is not an effect when I do not lower it more than 2 grams.
That I take 12 grams or 13 grams of whichever is a place to be troubled with. ::)

14
Downtown 300 / ROLLER COMP WEIGHT
« on: January 04, 2015, 12:47:30 AM »
Please tell.
I am going to change it for Dr.Pully, is ROLLER COMP WEIGHT(22121-LEA7-E00) of Downtown300i where is in a normal state several grams per one?

15
Downtown 300 / Re: found these on ebay. thoughts?
« on: January 04, 2015, 12:05:19 AM »
Careful!
I bought Delkevic, but was not able to attach it.
The inside diameter of Linkpipe is 33mm, and outer diameter of the exhaust is absolutely impossible for 37mm.

It is the product of a really bad maker.
I did not do the user support at all either and returned goods against ebay/paypal.
I confirm the contents of the PDF file and should see what kind of state it is in.
http://www.2shared.com/document/jDf1c6XF/Delkevic.html

Pages: [1]