KymcoForum.com

Scooters - 125 to 300 => Yager GT 200i => Topic started by: DaveABQ on July 31, 2012, 11:21:09 PM

Title: Disassembly of front end, not fun
Post by: DaveABQ on July 31, 2012, 11:21:09 PM

Well, I bought my Yager for $1900 with only 107 miles on it, so got a killer deal.  The reason why is the older gentleman that had it dumped it over in gravel trying to turn, slow speed, so it scratched the upper and lower plastic, $184 shipped for both.  I did end up getting a new brake lever also, even though it had minor scratches.

So today I took apart the whole front end. I took some pictures, but not when I had the lower skirts off of each side, which I did.  Many screws in the front end, here are a couple of pictures so that others can reference, I can tell you exactly how to do it, the service manual sucks.

I just wanted to show some pictures for reference, you can see how to get to the headlight bulb, which requires you to remove the whole upper plastic and windshield, there is also another shield like unit behind the windshield.

(http://www.pbase.com/rottweiler/image/145114592.jpg)

(http://www.pbase.com/rottweiler/image/145114593.jpg)

(http://www.pbase.com/rottweiler/image/145114594.jpg)

Now my machine is like new, not a scratch on it.  Thought about keeping the other plastic, but I hate crap laying around.  Could try sanding it down and painting, I have the air compressor and spray guns, but I don't plan on dumping it anytime soon lol.

Title: Re: Disassembly of front end, not fun
Post by: ScooterWolf on August 01, 2012, 12:33:07 AM

Beautiful job, Dave. Thanks for sharing, and send some pictures of the final results.

-Wolf

Title: Re: Disassembly of front end, not fun
Post by: DaveABQ on August 01, 2012, 01:57:50 AM

Thanks

And yes, before anyone asks, I did do the work in the kitchen, it's way too hot outside and in the garage

Title: Re: Disassembly of front end, not fun
Post by: old geezer on August 01, 2012, 02:21:03 AM

Dang, that was a good deal.

Title: Re: Disassembly of front end, not fun
Post by: Vivo on August 01, 2012, 03:24:45 AM

 ;)

Title: Re: Disassembly of front end, not fun
Post by: ludo on August 01, 2012, 06:30:47 AM

Thanks for sharing Dave!
I hope I never have to change that bulb then ;-)

Title: Re: Disassembly of front end, not fun
Post by: CROSSBOLT on August 01, 2012, 06:55:06 PM

Good show, Dave! You beat us to the punch as we were about to comment that it looked like your kitchen! Roger that on being too hot. What a PITA just to get to the head light bulb.....

Karl

Title: Re: Disassembly of front end, not fun
Post by: Cynzx62 on August 06, 2017, 10:33:33 PM

Would you happen to know what size neck bearings are