KymcoForum.com
General => Technical | How To => Topic started by: Astandane on June 15, 2012, 11:39:19 AM
-
Hi,
I would just like some clarification on how to adjust the chain on my Pulsar. Do I need a torque wrench to do this?
Thanks
-
No need for a torque wrench, just don't over tighten. You can easily re-adjust when slack appears.
-
Ok, and any adjustments I make need to be repeated on the other adjusting nut? I only need to loosen the rear axle nut on the left side?
-
Adjust both nuts and align the wheel also.