KymcoForum.com

General => Technical | How To => Topic started by: Fireslayer801 on March 08, 2018, 01:16:10 AM

Title: MXU 450i WONT START
Post by: Fireslayer801 on March 08, 2018, 01:16:10 AM

Hello, I have a 2017 kymco MXU 450i le. So here is what’s going on. I was plowing snow with it, when I started backing up, put the breaks on, left off the throttle, and it stalled. This has happened a few times before, but it would start right back up. This time however, push the start button, and nothing, not a sound. Everything is in the on position, brake lever held in, nothing. No sound that it’s even wanting to start. I have also noticed that the orange transmission icon does not go out after the few seconds it usually did!!!! Any info would be greatly appreciated!!!!!

Title: Re: MXU 450i WONT START
Post by: hypophthalmus on March 10, 2018, 03:02:52 AM

Is the brake light coming on? How's the battery voltage? Does anything happen if you jump the starter solenoid with a screwdriver?

Title: Re: MXU 450i WONT START
Post by: hypophthalmus on March 10, 2018, 03:06:34 AM

Upon further thought, it probably doesn't have a brake light. I'm supposing that there's a brake switch that needs to be triggered though that could be stuck.