KymcoForum.com

General => Technical | How To => Topic started by: AylmerFreerider on September 15, 2017, 12:16:29 AM

Title: Exhaust getting louder?
Post by: AylmerFreerider on September 15, 2017, 12:16:29 AM
Hi All,

I installed the Technigas Silent Pro on the 2015 Kymco Super 8 50R and it seemed ok at first but then I noticed that it seems to be getting louder and louder at the front of my scooter.  I did use a new gasket when installing as well and everything is tight.  Any ideas why it might be getting louder?  What else can I do?

Thanks
Title: Re: Exhaust getting louder?
Post by: de dee on September 16, 2017, 06:55:55 AM
I have a new scooter A Piaggio BV 350 sport,   and as I put mileage on the bike it sounds louder ,. just past 3,000 Km. and it is a lot louder,
Title: Re: Exhaust getting louder?
Post by: Stig / Major Tom on September 16, 2017, 11:16:24 AM
Louder at the FRONT  of your scooter?
Might be tight, and with new gasket.....but are things fitted correctly under there? Misaligned? Broken pipe?
I often use a camera to get a better look at things in a awkward area. Download to Dell and edit for a good look at things.
Perhaps nothing wrong - and you're getting annoyed now by loud pipe?
Stig
Title: Re: Exhaust getting louder?
Post by: de dee on September 16, 2017, 06:02:36 PM
THE SOUND HAS A LITTLE BLATT SOUND,  but not as loud as a H>D., at idle,.    it comes from the exhaust only,.   
Title: Re: Exhaust getting louder?
Post by: AylmerFreerider on September 17, 2017, 12:51:27 AM
Hey Stig,

Yes the sound is coming form the front.  I didn't tighten everything till all screws and nuts were in place just like the instructions said.  Will try and take a pic with my phone and see what I can find. Just wondering if maybe I should use a gasket, plus some type of rubberized gasket in a tube to double things up.
Title: Re: Exhaust getting louder?
Post by: de dee on September 18, 2017, 01:12:13 AM
with high temperature I would not use rubber ,   it burns
Title: Re: Exhaust getting louder?
Post by: Tromper on September 21, 2017, 07:16:32 AM
You can buy sheets of exhaust gasket material in various thickness and most FLAPS or online in a pinch.
I bit of a pain to cut and shape, but since you get a large sheet there's plenty of room to mess up while getting it just right.

THE SOUND HAS A LITTLE BLATT SOUND,  but not as loud as a H>D., at idle,.    it comes from the exhaust only,.