KymcoForum.com
Scooters - 125 to 300 => Agility 125 => Topic started by: davnjessy on July 27, 2017, 02:27:50 PM
-
Hi all,
I have a 2015 Agility City that this morning presented a flat battery.
It's charging at 12.4V so I installed a new regulator but it's no different.
The manual I have is telling me to check resistance of the white wire of the generator but I have no white wire, only pink and yellow.
I have checked both and neither are giving me the correct reading. Does anyone know if the ignition needs to be on for this test?
cheers
D
-
Did you get a new original Kymco regulator?
Sent from my Redmi 4 using Tapatalk
-
Yes the new regulator is original
-
No white wire as in the picture?(https://uploads.tapatalk-cdn.com/20170727/6df4346a201bd31c4d2f398350663fc1.jpg)
Sent from my Redmi 4 using Tapatalk
-
I have that same manual and tried to do that test on the generator but no white wire, there is yellow and pink only in the 2 pin plug
-
How old is your battery? Need to test the cranking amps. (Thats what starts the scooter)