KymcoForum.com
Scooters - 50cc => Agility 50 => Topic started by: ldersch on June 29, 2015, 08:35:49 PM
-
Hi all,
I'm trying to replace my speedo cable, but I can't seem to get the front cover off. I have removed all visible screws, and it loosens, but does not come off. I've also noticed that I may have to remove the turn signal lights as well since the plastic completely surrounds them. Am I missing something simple? TIA!
-
Can you take the black plastic off the back & access it from there? I've had that off with 6-8 screws.
-
Can you take the black plastic off the back & access it from there? I've had that off with 6-8 screws.
Hi jay,
Yes, I tried that too, it comes loose, but not off. Seems to be held somewhere near the spedo, but I can't see any kind of fastener I need to remove. The manual makes it look so easy, but when I take out the screws as instructed, it's still a no go. I'm reluctant to pry too hard for fear of damage. I'm hoping there is something simple I'm missing.
-
Ther is little taps you have to push down on the plastic.
-
It's been a while since I removed mine, but i seem to remember a screw somewhat hidden from normal view I had to see when looking from below. I don't think i had to remove the signal lights.
Hi all,
I'm trying to replace my speedo cable, but I can't seem to get the front cover off. I have removed all visible screws, and it loosens, but does not come off. I've also noticed that I may have to remove the turn signal lights as well since the plastic completely surrounds them. Am I missing something simple? TIA!