KymcoForum.com

Scooters - 50cc => Agility 50 => Topic started by: Smithg27 on August 15, 2013, 02:23:42 AM

Title: Actual Stock Belt Size
Post by: Smithg27 on August 15, 2013, 02:23:42 AM

I have searched everywhere for the size of the stock belt for the 2009 Agility 50.

I have searched this entire site along with others and I haven't found anything that has the ACTUAL stock size.
I have seen 699, 729,732, 736, 743, 748mm

From what I've found its something like 17.7 or 18mm wide and a 30 degree angle.

Has anyone tried a slightly long belt than the stock one with an OEM variator to see if it would increase top end? If so what did you find to work best?

Title: Re: Actual Stock Belt Size
Post by: Pimpy1 on August 15, 2013, 03:11:52 AM

Most of them use either a 738-18-28 or a 748-18-28. It depends on which year and model you have.

Title: Re: Actual Stock Belt Size
Post by: wheelsoffreedom76 on August 21, 2013, 01:01:54 AM

2013 AG50 belt reads " 23100-KEB7-9000 " Has Kymco and Bando both printed on it.

Title: Re: Actual Stock Belt Size
Post by: wordslinger on August 21, 2013, 01:14:19 AM

..the Gates 729-18-28, premium is very close to oem Bando...

..probly the best performing belt I ever ran on my kymmi a50....

..tho, .....I been running Gates 732-18.5-28 on my super9..

..would love to tweak a 4t cvt to that belt....

Title: Re: Actual Stock Belt Size
Post by: wordslinger on August 21, 2013, 01:17:45 AM

..tho, I ran my oem bando 32,000 kms....

..then it broke, and I found this forum...



peace