KymcoForum.com
Scooters - 125 to 300 => Super 8 150 => Topic started by: Stig / Major Tom on July 25, 2013, 12:02:47 AM
-
Looking to replace my LIKE 200i rear shocks with a set made for the Super 8 Kymco.
could one of you owners throw a tape measure on the rear shock and tell me the measurement from top mount hole to bottom mount hole. (distance from center of bolt to center of the other bolt -NOT total length of shock - but mounts distance.) and your impressions for riding 2 up - medium sized people (say 325lbs total for the 2 of you)
Thanks very much!
-
I have a Super 8 Stig and the shock measures 13 inches from bolt to bolt... just wasn't able to do it earlier because of the rains... ;)
-
I have a Super 8 Stig and the shock measures 13 inches from bolt to bolt... just wasn't able to do it earlier because of the rains... ;)
Mr Vivo, You're a peach! and your shocks don't cost too much, either! So, Super 8 shocks or Progressive ?! ($95 vs @$250~!)What we have to do Vivo is put you and the lovely Mrs. Vivo on a LIKE 200i ..... and see if you two bottom out the shocks or see the lower body edge nearly touching the muffler top. :-}
-
I have to add this... My son is around 240 lbs. and I'm 180 lbs. and we've done some trips here and there many times also... no issues even... Another factor I think is that the suspension travel of the Super 8 is greater than the Like... so the like is more likely to bottom out sooner than the S8... my two cents...
Here's another point to ponder Stig, the Like weighs 120 kgs. while the Super 8 is 125.5 kgs. let's do the math...
-
Vivo,
I just received my new Super 8 (Kymco) shocks (Black). The originals were yellow and getting rusty and ugly. Can I change these myself with standard tool sets or do I need special tools (i.e. spring compressors)?
-
No special tools are needed, just take the bolts off and the shock should come off.
-
Thanks 8)
-
..also might want to have an extra person to help support the scoot...
8)
..it can be done alone, but it's easier if you have someone holding the weight of the scoot off the fasteners while you are taking them out...
-
Amen wordslinger. Im all by myself in the city and had to do shock work. I'd like to call it "scooter see-saw". Had to use the main stand as a balancing point and use my feet/body to have the scoot lean the direction i needed all while un/installing the shock!
-
..lol..245luigi, that sounds like me when I installed the 1-1/2" extension on my a-50's rear shock...
..hey, where there's a will, there will be a way!!
8)
-
Thanks all. I got the shocks done.... but bucket had to come out, rear fairings off, muffler (right side). The top bolts are inaccessible without fairings (rear fender body) off. And the rear bolt bottom needs muffler removal (bolt too long to remove). In any case they look great and your help is appreciated.
Why take the car? Jack 8)
-
..I've never dealt with the plastics on a super8...s9 Tupperware is fairly easy...
...glad for your success!!
:D
-
..I've never dealt with the plastics on a super8...s9 Tupperware is fairly easy...
...glad for your success!!
:D
I pray everyday for my lights to work... otherwise I have to remove those plastics to change a bulb...
-
I pray everyday for my lights to work... otherwise I have to remove those plastics to change a bulb...
..yikes!!
:o
-
But hey, labor here is cheap and I can have it done by a mechanic... ;) ;) ;)
-
Thanks all. I got the shocks done.... but bucket had to come out, rear fairings off, muffler (right side). The top bolts are inaccessible without fairings (rear fender body) off. And the rear bolt bottom needs muffler removal (bolt too long to remove). In any case they look great and your help is appreciated.
Why take the car? Jack 8)
Hello there, Vivo measured his shocks for me on his scoot - could you measure your old set for me....from center of mounting hole at top and bottom.
And another question:
Is the top bolt 10mm and the bottom 8mm ? I think this is correct - but have no way to check.
Trying to work out if these would be a possible & good swap on a LIKE 200i.
One concern is - IF they fit - is why they are cheaper than a LIKE shock. Maybe because the LIKE's are chrome - Super 8 is black paint.? Hope is not because they are shorter or weaker than a LIKE shock!
Any help here appreciated ~!
Thanks, Stig