KymcoForum.com

Scooters - 50cc => Agility 50 => Topic started by: krievins LATVIA on July 27, 2009, 08:40:03 AM

Title: please help me :)
Post by: krievins LATVIA on July 27, 2009, 08:40:03 AM

my scoter go very good :) but it must go faster :) when it go on 45km/h it not all! it feel like it stop and all,  and it do not go faster :(
What i need to do? what and where I need to cut in or on my cdi? :)
I got agility 50 :) sorry about my mistakes :)

Title: Re: please help me :)
Post by: zombie on July 28, 2009, 01:26:54 AM

look under the zx/50 section. there is a post on de-restricting the cdi

Title: Re: please help me :)
Post by: Kenho21 on July 29, 2009, 07:30:15 PM

there are also pics and instructions under the agility 50 thread here, under de restricting your agility or something like that. I did the cut into my CDI thing thought I was going to far but turned out working great.

Title: Re: please help me :)
Post by: wordslinger on July 29, 2009, 08:01:13 PM

...my dealer cut mine...well, they ground about a half-inch off the whole corner....there's a pic of that somewhere on here too...

Title: Re: please help me :)
Post by: wordslinger on July 29, 2009, 08:03:03 PM

...here it is...





       ...click on image for larger...

Title: Re: please help me :)
Post by: blue on July 30, 2009, 12:55:12 AM

you can take a small saw and just cut about 1/4 inch down it to the box. you also have to replace the washer behind your fly wheel.by the varirater