KymcoForum.com

General => Technical | How To => Topic started by: drewfish on July 02, 2013, 02:25:44 AM

Title: Aussie kymco super8 2012 50t exhaust derestrition
Post by: drewfish on July 02, 2013, 02:25:44 AM

Hi guys great forum. I just wanted to let everyone know that when I welded up the two small pipes on the exhaust I got over 10kph faster on top end speed and it got there in half the time.the smallest pipe near the flange I cut of and welded the hole up and the larger visible one I cut of filled the hole then welded the pipe back on so that know ones the wiser exept the readers of this wonderful forum.you could just buy an after market pipe but this didnt cost anything and it goes much much better. I also went up a couple of jet sizes too now that it can breath properly.cheers.

Title: Re: Aussie kymco super8 2012 50t exhaust derestrition
Post by: drewfish on July 14, 2013, 05:24:36 AM

Just adding some pics

Title: Re: Aussie kymco super8 2012 50t exhaust derestrition
Post by: drewfish on July 14, 2013, 05:31:44 AM

Sorry I forgot I had this pic, I cut the back of the muffler of just to have a look at the cat, it didn't seam to be restricting anything everything flowed fine so it was a total waste of time so don't bother this took up over half the time of the hole job. I hope the helps everyone.cheers