KymcoForum.com

General => Technical | How To => Topic started by: Gizmo327 on June 03, 2013, 06:29:27 PM

Title: Torque settings
Post by: Gizmo327 on June 03, 2013, 06:29:27 PM

I have a Venox 250 and the starter clutch had to be fixed,  I have the torque settings for the one bolt that holds the clutch in place on the spline.

But what i am looking for is the setting for the three bolts that hold the clutch pack together. I have parts ordered and on the way. found the instructions on removing and checking clearance but not hot on taking it apart and back together.

What happened those three bolts that hold the pack together loosened off and jammed against the reduction sprocket and kept the starter engaged :(

thanks in advance for any help

Title: Re: Torque settings
Post by: MotoRandy123 on June 03, 2013, 08:19:34 PM

Well you can find the manual here;

[url]http://www.manualedereparatie.info/en/download/kymco-venox-250-Service-manual.html[url]

It should have what you need....

OOPS it's in Italian! Maybe you can get it translated?

Title: Re: Torque settings
Post by: Gizmo327 on June 04, 2013, 07:42:51 AM

thanks, i finally found it