KymcoForum.com

Scooters - 50cc => zx50 => Topic started by: robmsz on April 16, 2013, 10:42:56 PM

Title: looked for sticky on service manual on zx 50 where can i find one
Post by: robmsz on April 16, 2013, 10:42:56 PM

i know there's one here somewhere, maybe on a different section?

its popping like it wants to start just wont start swapped cdi's no luck

'94 zx 50

old gas? clogged carb? bad plug? its been too sh**ty outside 4 me to work on it right now.

Title: Re: looked for sticky on service manual on zx 50 where can i find one
Post by: Vivo on April 17, 2013, 03:27:11 AM

.http://www.kymco.it/contributi/download/MANUALI_OFFICINA/MO%20ZX50%20(inglese).zip (http://www.kymco.it/contributi/download/MANUALI_OFFICINA/MO%20ZX50%20(inglese).zip)

Title: Re: looked for sticky on service manual on zx 50 where can i find one
Post by: robmsz on June 07, 2013, 08:50:52 PM

I'm still looking for compession high n low to know if i kneed to replace my jug.

Can anyone out there help please............

Title: Re: looked for sticky on service manual on zx 50 where can i find one
Post by: MotoRandy123 on June 07, 2013, 10:52:34 PM

Well it's nominally 163 psi (compression pressure 11.5kg/cm).
The manual says low or high is bad but not the range...

Title: Re: looked for sticky on service manual on zx 50 where can i find one
Post by: robmsz on June 07, 2013, 11:02:50 PM

What does it say high to low?

Title: Re: looked for sticky on service manual on zx 50 where can i find one
Post by: MotoRandy123 on June 08, 2013, 12:25:34 PM

Well it doesn't give numbers. The guy on U-Tube says 130 - 180. You get lower numbers
if you don't open the throttle while cranking.
This is what the manual says;

Title: Re: looked for sticky on service manual on zx 50 where can i find one
Post by: refrig on June 10, 2013, 12:19:41 AM

 www.hondaspree.net (http://www.hondaspree.net) also has a service manual