KymcoForum.com

Motorcycles => Venox 250 => Topic started by: foxy on April 15, 2013, 02:31:21 PM

Title: Turn signals don't blink
Post by: foxy on April 15, 2013, 02:31:21 PM

Just pulled my Venox out of mothballs after a really cold winter. Started on the first crank, but signals, while they came on , did not blink. Thinking that the blinker may be like a large capacitor I reasoned that the battery was low and couldn't support flashing blinkers while at idle, so I charged the battery for an hour with a Tender...and I have blinking signals again. Worked for me , so if you have a similar issue try charging the battery!

BTW is Kymco making the Venox anymore. i know they are not importing into the States at this time, but it seems like just the moment to import this great little bike (60mpg).

Title: Re: Turn signals don't blink
Post by: MaryK on April 15, 2013, 04:44:55 PM

It is always best for the battery life to be kept in a full charge state over the storage period.
Or at least charge it before you resume using the scooter.

Scoot safely,

Title: Re: Turn signals don't blink
Post by: ophelia on April 15, 2013, 10:32:18 PM

I think you can still grab some Venox still new in crate if you ask the dealer. They might have to be shipped around.