KymcoForum.com
Scooters - Big Bore => Xciting 500 => Topic started by: RURC on April 04, 2013, 09:55:43 PM
-
I was trolling You Tube and came across this. I thought that this is something that others might be interested in. I know that it is not a Kymco but the process is the same.
tmax how variator works (http://www.youtube.com/watch?v=2XDqgGFfCso#)
-
Very cool - thanks. Once again - a picture is worth a thousand words.
-
At you tube type in variator kymco xciting 500 & u will find a video out of Germany where he installs Dr Pulley weights. It shows the complete variator change. Very good. :-*
-
At you tube type in variator kymco xciting 500 & u will find a video out of Germany where he installs Dr Pulley weights. It shows the complete variator change. Very good. :-*
The problem is that it is not in English, or at least the one I saw was not.
-
The one I view has no speach. Just music as he takes it apart and puts it back together again. The title has Dr pulley rollen or something like that in the title. :-*
-
When on youtube, type in (Dr Pulley Rollen und Slider einbau Kymco Xciting 500 i R ABS). The video was put on by MegaXciting 500. No speach, none needed. If you have electric impact wrench u can change belt , variator, clutch yourself. Very easy. Make sure washer that go's on first behing variator is beveled side up against the engine case. the belt is directional, look for arrows on new belt, and when you place the back/inside pulley half (the pulley half that holds the roller weights) on a table in front of you, the rollers go into slots open side to the left, closed end plastic side to right, just like he does in video. NO GREASE ANYWHERE. NO LOCKTIGHT LIKE SOME IDIOT TOLD ME TO DO. So easy even a Sissy Mary can do it. :-*
-
1989 Honda elite Kymco zx CVT displayed (http://www.youtube.com/watch?v=wfQnF2SGcOY#)
-
Heres one of my CVTs.