KymcoForum.com

Scooters - 125 to 300 => Grandvista 250 => Topic started by: perkussion on March 30, 2013, 05:54:39 PM

Title: VIN # stamped on frame?
Post by: perkussion on March 30, 2013, 05:54:39 PM
Hi everyone,
 I bought a 2008 Grandvista in bad shape from a used car dealer in another state. It has a title.
After going over the scooter, (taking off every panel), and putting hours of work into it,
I eventually discovered that there was no VIN number plate.
The used car dealer, (about 300 miles away), is now playing dumb.

If you take off the little cowl cover there are two rivets but no plate.
On other scooters that we have, the number is just stamped on the frame.

When I bought it, I only compared the title and the VIN number/model number sticker on the scooter's lower right side.
They matched.

Now someone from another state wants to buy it from me but if it has no VIN, he won't be able to register it.

My questions are:
Is there supposed to be a dog tag type plate with a VIN on Kymco scooters?
Is there any other place that the number is stamped on the frame so maybe the DMV officials can compare it to the title.

Thank you guys.     
Title: Re: VIN # stamped on frame?
Post by: de dee on March 30, 2013, 10:01:47 PM
   on my downtown the number is on the frame under the seat and meti box,. and there is a pop out plug in the box over the number,.
Title: Re: VIN # stamped on frame?
Post by: perkussion on April 04, 2013, 12:39:53 PM
Thank you de dee.
 The DMV accepted the VIN # on the sticker applied to the lower right side.

 
Title: Re: VIN # stamped on frame?
Post by: MotoRandy123 on April 04, 2013, 09:02:54 PM
They are not required to have it on the neck, so sometimes it's in a different location.
(especially if there is plastic that would cover it)