KymcoForum.com

General => Technical | How To => Topic started by: partyhut on January 12, 2013, 05:19:55 PM

Title: 04 b&w 250 throttle cable problem
Post by: partyhut on January 12, 2013, 05:19:55 PM

The throttle cable has a lot of slack in it on the return side at the card.  More than the adjustment can correct.  Does the cable stretch over time?
The throttle works smoothly from the hand grip. Is there some adjustment I have missed?  Not enough take up at the grip end either.
Worries me to ride it in this condition. Could I have a frayed cable that is about to break or what?  In need of advise and instruction    ole PH

Title: Re: 04 b&w 250 throttle cable problem
Post by: wordslinger on January 12, 2013, 10:40:30 PM

..yes, cable will stretch, especially if pulled hard, WOT a lot...

..could be frayed as well...thorough inspection at both ends is in order, at least...   ;)

..there should be adjustment at both ends of the cable, tho i'm not familiar with your scoot...

Title: Re: 04 b&w 250 throttle cable problem
Post by: partyhut on January 13, 2013, 03:01:25 AM

followed advice - got to both ends of both cables.  Ends ok  pulled on each.  the return cable is apart in the cable sleeve
will have to replace return side cable..

Title: Re: 04 b&w 250 throttle cable problem
Post by: MotoRandy123 on January 13, 2013, 11:59:01 AM

I like to take those out, makes it easier to turn. The spring does the returning and I've never had one break!

Title: Re: 04 b&w 250 throttle cable problem
Post by: partyhut on January 13, 2013, 08:25:08 PM

that sounds reasonable, of all the bikes i've had, this is the first time I remember having a return cable.