KymcoForum.com

General => Technical | How To => Topic started by: Trancebear on December 31, 2012, 04:34:55 AM

Title: Question about TDC and timing
Post by: Trancebear on December 31, 2012, 04:34:55 AM

The manual seems to not be that clear on where my flywheel needs to be. When installing my new camshaft along with my 300cc kit I used the mark on the flywheel right next to the T imprinted on the flywheel. Is this correct or should I align it with the T itself? See picture for reference. (http://img.tapatalk.com/d/12/12/31/yrare2em.jpg)

Title: Re: Question about TDC and timing
Post by: MotoRandy123 on December 31, 2012, 02:07:25 PM

I found this in a write up on TimTaylor on adjusting the People 250 S valves (it should be in all the manuals!);

http://www.timtaylor.net/Scooter/Manuals.htm (http://www.timtaylor.net/Scooter/Manuals.htm)

Title: Re: Re: Question about TDC and timing
Post by: Trancebear on December 31, 2012, 03:20:51 PM

You are awesome! Thanks a million. Now I have to figure out why the darn thing won't start.

Title: Re: Question about TDC and timing
Post by: MotoRandy123 on December 31, 2012, 04:14:29 PM

Well timing is first then check the valve adjustment. Also look for something you forgot to
re install (plug?). Good luck!