KymcoForum.com

Scooters - 50cc => People 50 => Topic started by: scootertwilight on June 30, 2009, 01:43:25 AM

Title: Replace Spark Plug
Post by: scootertwilight on June 30, 2009, 01:43:25 AM

I want to replace the spark plug on a Kymco People 50. I removed the plate in front of the seat . . Is the spark plug beneath  the rubber cap? I don't want to damage
anything. Please advise on how to remove or find the spark plug.

Thank you

Title: Re: Replace Spark Plug
Post by: luc1992 on June 30, 2009, 02:28:27 AM

yes just pull on the rubber cap and it pops off, underneath is the spark plug. to remove it you should have gotten a tool with your kit that looks like a long cilinder. it has a rubber ring inside to grip the plug. just slip on the cilinder and unscrew the plug. You wont break anything trust me ;). when you replaced you plug just press the rubber cap back on it.
Good luck!

Title: Re: Replace Spark Plug
Post by: yanobobano on July 08, 2009, 01:05:15 PM

i bought my people 50 used, and it did not have a tool kit with it.. so if i want to change the spark plug would i be able to get it out without that?

Title: Re: Replace Spark Plug
Post by: axy on July 23, 2009, 07:52:40 AM

Quote from: yanobobano on July 08, 2009, 01:05:15 PM

i bought my people 50 used, and it did not have a tool kit with it.. so if i want to change the spark plug would i be able to get it out without that?

No, you will need spark plug wrench. You can buy it anywhere for a few bucks.