KymcoForum.com
Scooters - 50cc => zx50 => Topic started by: Raindrop on December 13, 2012, 01:48:02 AM
-
So i had to adjust float level to get this carb from pissing out. did it. no leaks
But no it runs for five min great. then bogs out?
WHATS MY PROBLEM NOW? JETS?
-
You have a manual choke or auto?
-
Manual
-
I would imagine its running out of fuel or you have an air leak thats causing a soft seize. Hard to say, I would put a clear fuel filter inline and see if its still full when it bogs out and that will settle that possibility. If its still getting fuel and its bogging/dieing I would look for air leaks. How is your idle? Does it maintain or does it fluctuate a lot like high idle then low then high.
Also will it bog after 5 minutes if its just on its stand idling or do you have to be riding for it to happen? When you say bog do you mean it just sounds like poop and wont accelerate or does it stall out and die? So many things it could be.
-
Like it runs with choke on. ?. Then take choke off. Run for min then want to die. ? Like when its sitting. try to throttle it to keep going then. bawwwww bawww. ? Then it will restart with choke on. maybe do i got float to high. cause it started this after i touched float?
-
Ya im a noob. float needle in wrong. I spun it around put it back together and now perfect. but i think 115 jet not good enough. dude im so sick of taking carb off and on. But i know its gotta be done.
-
Glad you figured it out
Yeah, I can't tell you how many times I've had mine on and off. If you're just changing a jet or something no need to take all the lines and the cable off. Just unbolt it from the intake and turn it sideways so you can get the bowl off. Much easier than taking everything off the carb every time.
-
I will be sure to try that.
Plug color looks brownish greyish. lol
So bigger jet right.
And what ratio should i run
-
Plug chops
Plug chops
Plug chops
... Google it
-
Whats google? lol
So whats a good mix for the ped? 35/1 50/1 ?