KymcoForum.com

Scooters - 125 to 300 => Yager GT 200i => Topic started by: MotoRandy123 on November 18, 2012, 03:52:01 PM

Title: Make a Windshield
Post by: MotoRandy123 on November 18, 2012, 03:52:01 PM

Having more time than money, I found my old broken Parabelium
windshield and decided to cut it down to try on the Yager;
(http://i1061.photobucket.com/albums/t478/MotoRandy123/Newest/DSCN2236.jpg)

I used my jig saw with a fine non-curf blade (the sides are straight) and cut very slowly. Too quick and
it will crack!;
(http://i1061.photobucket.com/albums/t478/MotoRandy123/Newest/DSCN2238.jpg)

I stuck it on with some velcro dot's left over form a laminar lip install;
(http://i1061.photobucket.com/albums/t478/MotoRandy123/Newest/DSCN2241.jpg)

(http://i1061.photobucket.com/albums/t478/MotoRandy123/Newest/DSCN2242.jpg)

Kind of ugly and I'm not sure it will stay on very well but good to see how much windshield I need!

Title: Re: Make a Windshield
Post by: Zimmerman on November 18, 2012, 07:06:54 PM

Randy,

Did you take 'er for a spin ?

How'd it work ?

KZ

Title: Re: Make a Windshield
Post by: MotoRandy123 on November 18, 2012, 08:06:37 PM

Well I have to let the velcro dots stick for 24 hours for max adhesion so
a test run tommorrow.

Title: Re: Make a Windshield
Post by: MotoRandy123 on November 23, 2012, 08:50:57 PM

 Well 60F today so I took her out for a ride. It stopped a lot of wind but there was a lot of noise
and a tiny high speed jet of air on my upper helmet. All in all I'd call it a fail because of the noise.
It did help the scooter cut through the air better, most of the aftermarket windshields are big!
I wish CalSci or Parabellum made one for the Yager...