KymcoForum.com

Scooters - 50cc => Agility 50 => Topic started by: Bubba on October 22, 2012, 10:29:49 PM

Title: How do you take off stock Exhaust?
Post by: Bubba on October 22, 2012, 10:29:49 PM

I have done some searching and drawing up blanks. Does anybody have a write up of instructions? im removing mine to put on Leo Vince exhaust on my 2012 agility 50
Thanks guys

Title: Re: How do you take off stock Exhaust?
Post by: blue on October 22, 2012, 10:42:48 PM

theres only 3 bolds the 2 up were the mufller is bolded to the motor and the one by the back tire.
lefty losy righty tighty............lol

Title: Re: How do you take off stock Exhaust?
Post by: jprestonian on October 22, 2012, 11:37:09 PM

Plasma torch.

Hey, you don't wanna put it back on, do ya?
.

Title: Re: How do you take off stock Exhaust?
Post by: skippy on October 23, 2012, 08:16:49 AM

three bolts hex head to undo on exhaust. two 10m nuts on exhaust to engine.
fitting the leo is harder to get right. put everything on lose..... as you will need to re aline when its on. there should be some distructions with the leo.....ps dont use the 3 yellow clutch springs that come with the leo kit for the clutch. there to hard for a a 50 clutch.

Title: Re: How do you take off stock Exhaust?
Post by: Bubba on October 23, 2012, 04:46:00 PM

Quote from: skippy on October 23, 2012, 08:16:49 AM

three bolts hex head to undo on exhaust. two 10m nuts on exhaust to engine.
fitting the leo is harder to get right. put everything on lose..... as you will need to re aline when its on. there should be some distructions with the leo.....ps dont use the 3 yellow clutch springs that come with the leo kit for the clutch. there to hard for a a 50 clutch.

So just you the stock ones then?

Title: Re: How do you take off stock Exhaust?
Post by: skippy on October 23, 2012, 05:42:12 PM

the spring that come with the leo are 2000rpm ok for 2 stroke but not 4 stroke. you would be best putting 1500 rpm ones if you wanted to upgrade them

Title: Re: How do you take off stock Exhaust?
Post by: Bubba on October 24, 2012, 02:15:46 AM

But can you keep the Stock springs on though?

Title: Re: How do you take off stock Exhaust?
Post by: skippy on October 24, 2012, 07:28:58 AM

yer the springs dont do a hell of a lot anyway. just forget the springs.

Title: Re: How do you take off stock Exhaust?
Post by: streido on October 24, 2012, 11:01:28 AM

Quote from: skippy on October 24, 2012, 07:28:58 AM

yer the springs dont do a hell of a lot anyway. just forget the springs.

+1 like he says.

Clutch springs make little or no real difference on our little 4t scoots, torque spring changes things but you dont need to worry bout that yet.

Title: Re: How do you take off stock Exhaust?
Post by: Bubba on October 24, 2012, 12:59:20 PM

Thanks!

Title: Re: How do you take off stock Exhaust?
Post by: skippy on October 24, 2012, 08:10:32 PM

bubba have you bought the leo yet? as on the 4 stroke it does nothing, except look good and sound loud. i love my leo but £100 is a lot to pay for an exhaust that has no proformance diffrence.
 if you looking to improve proformance look up streidos derestriction guid http://www.kymcoforum.com/index.php?topic=6198.0 (http://www.kymcoforum.com/index.php?topic=6198.0)

Title: Re: How do you take off stock Exhaust?
Post by: streido on October 24, 2012, 09:37:02 PM

Yeah i'll back up about the Leo Vince cos i got one too. Best thing about it is it looks good and wont rust like stock exhausts, wont really improve performance tho at all.