KymcoForum.com

General => Technical | How To => Topic started by: CROSSBOLT on August 12, 2012, 11:35:52 PM

Title: Variator and clutch tool
Post by: CROSSBOLT on August 12, 2012, 11:35:52 PM

Three of three. Bars are 22 inches long of 1/4 X 3/4 steel. Bolts are 1/4-20 X 3/4 inch.  Nuts screw down for variator and screw out for clutch. 

Karl

Title: Re: Variator and clutch tool
Post by: ludo on August 13, 2012, 09:15:55 PM

Thanks Karl!!
It's going to be very useful very soon  :)

Adding your two other pics to this thread so it's all in one!

Title: Re: Variator and clutch tool
Post by: ludo on August 13, 2012, 09:16:45 PM

All there now  ;D

Title: Re: Variator and clutch tool
Post by: CROSSBOLT on August 14, 2012, 10:19:02 PM

Thanks, Ludo! You have been very patient and helpful. Between you and my wife (who is computer savvy, not me!) These pix finally made it to the forum!

Karl