KymcoForum.com
Scooters - 125 to 300 => Bet & Win 250 => Topic started by: Trancebear on August 01, 2012, 12:05:07 AM
-
I am trying to extract every ounce of power from this fantastic engine and my project is almost complete. I bought the 300cc kit with the new cam, a turbokit variator and Dr Pulley clutch, MRP Racing exhaust and a 32mm CVK careburator. I need to upgrade the ignition but I have not found any parts for this particular scooter. It already has the Iridium spark plug. Any ideas?
-
Sorry I can't help you with your question, but can I ask you about the 300cc kit. What else is reqd to upgrade to this kit? I would have thought it is just a bigger cylinder and piston and therefore nothing else is needed and that the carb would handle the extra load. Cheers and good luck. Let us know what it rides like !
-
What about the OEM ignition system of other Kymco 300cc?... DT, Xciting, etc.
-
Measure the resistance of your OEM coil, and check these bad boys out...
http://www.nology.com/profiremotor.html (http://www.nology.com/profiremotor.html)
-
Sorry I can't help you with your question, but can I ask you about the 300cc kit. What else is reqd to upgrade to this kit? I would have thought it is just a bigger cylinder and piston and therefore nothing else is needed and that the carb would handle the extra load. Cheers and good luck. Let us know what it rides like !
With the 300cc kit you need more fuel to make more HP and the stock carb will not feed it enough. I chose to go with the exhaust and the cam for better flow and more HP.